pagelmslogobanner

LMS-PT12 EREC GIN POLE

Gin Pole Classifications
Class A             0 < 1,000-pounds gross loading
Class B             1,000 < 3,000-pounds gross loading
Class C             3,000 < 10,000-pounds gross loading
Class D             10,000-pounds and over gross loading

Manufactured to  ANSI/TIA-322

  • AWS CERTIFIED
  • U.S. AWS CERTIFIED WELDER ASSEMBLED
  • AWS INDEPENDENT CONTRACTOR INSPECTED
  • MEETING AWS D1.1:2015 STRUCTURAL WELDING CODE-STEEL
  • STORAGE TUBE
  • LOAD CHARTS ARE POLE SPECIFIC WITH SERIAL NUMBER ON THEM MATCHING POLE
  • 5.0    ANALYSIS AND DESIGN OF GIN POLES
  • 6.0   GIN POLE CONSTRUCTION
  • AWS WELDER CERTIFIED
  • U.S. CERTIFIED GIN POLE AWS WELDER ASSEMBLED
  • CERTIFIED AWS INDEPENDENT U.S. CONTRACTOR INSPECTED
  • U.S. NEW MANUFACTURE METALIZED ROUGH COAT FINISH
  • WITH ROOSTER HEAD
  • GUY TOWER BASE END
  • OPTIONAL SST ROLLER END
  • GIN POLE STORAGE RACKS
  • NEW MANUFACTURE METALIZED SURFACE
  • SINGLE SHEAVE GIN POLE ROOSTER HEAD
  • 12″ SHEAVE  WILL ACCOMMODATE 3/4″ DOUBLE BRAIDED ROPE AS WELL
  • WORKS WITH LMS PT12 STANDARD GIN POLE WITH 10′ SECTIONS

LMS PT12-EREC HEAD-END LMS-PT12-GIN-POLE-METALIZED LMS-PT12-GIN-POLE-METALIZED LMS-PT12-GIN-POLE-METALIZED LMS-PT12-GIN-POLE-METALIZED

LMS-PT12S LOAD CHARTLMS-PT12S LOAD CHART

SHIPPING DIMENSIONS

  • 42in /  1.06m  TALL FRAME
  • 42in / 1.06m  WIDE IN SHIPPING FRAME
  • 20ft / 6m LONG

WEIGHTS

  • HEAD SECTION 172 Lb / 78 Kg
  • CENTER SECTION 20′  260Lb / 118 Kg
  • TAIL SECTION 178 Lb / 81 Kg
  • ROOSTER HEAD 35 Lb / 16Kg
  • SHIPPING WEIGHT 800 Lb / 363Kg

All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36
Maintain your required documents along with work plan, engineer sign off for each specific job. 

OSHA required Forms supplied with gin poles we manufacture.  

  • Annual Pole Certification signed and numbered
  • Annual Pole Inspection Report signed and numbered
  • VT Visual Welding Inspection Report, done at time of manufacture
  • Mill Report on steel specification ASTM A500, Grade B/C
  • Charpy report on steel temperature test to –40 degrees
  • PE Stamped Pole specific Load Chart

CERTIFIED Green Gin Poles are manufactured 100% from USA recycled steel. 


CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS . Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300