LMS GP 20 HDHCRE GIN POLE
Our heaviest duty round pole consisting of a 3 Section slip joint for hand carries, coupled with a rooster head and roller end.
Manufactured to ANSI/TIA-322
- AWS Certified
- U.S. AWS Certified welder assembled
- U.S. Certified Gin Pole AWS welder assembled
- Certified AWS independent U.S. contractor inspected
- AWS D1.1:2015 structural welding code-steel compliance
- Load charts are pole specific with matching serial numbers
- 5.0 Analysis and design of Gin Poles
- 6.0 Gin Pole construction
- Rooster head/ Chicago end option O
- Metalized surface
- Round poles are not man-rated
- 375 Lb / 170 Kg Pole weight
- 20 Lb / 9 Kg slip rooster head
- 118 Lb / 53 Kg top section
- 122 Lb / 55 Kg midsection with slip
- 115 Lb / 52 Kg end section w/o slip and tail roller
- 207 Lb / 94 Kg Wood shipping crate
OSHA required Forms supplied with all LMS Gin Poles we manufacture.
- Annual Pole Certification signed and numbered
- Annual Pole Inspection Report signed and numbered
- VT Visual Welding Inspection Report, done at the time of manufacture
- Mill Report on steel specification ASTM A500, Grade B/C
- Charpy report on steel temperature test to –40 degrees
- PE Stamped Pole specific Load Chart to ANSI/TIA-322 standard.
Gin Pole Classifications
|Class||Gross Loading||Load Line Size||Impact Factor Req’d steel wire rope|
|A||0 < 1,000 Lbs||d<= 5/16″||1.45|
|B||1,000 < 3,000 Lbs||5/16″ < d <= 7/16″||1.35|
|C||3,000 < 10,000 Lbs||7/16″ < d <= 9/16″||1.25|
|D||10,000 + Lbs||d > 9/16″||1.20|
We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers and nuts only. Remember to inspect before re-using
Certified Green Gin Poles are manufactured 100% from the USA recycled steel.
Certified SDVOSB | Minority owned company
Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C. All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters in the Americas, thanks to team efforts and most important our customer support. “Service-disabled veteran-owned company built in America by Americans.” Minority owner and plant located in the HUB zone. Support our efforts as we support your freedom.
Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans, and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.