LMS GP PRH Gin Pole manufacturing, servicing, inspections, and repairs we are the primary source for these services for all of the Americas since 2011.  We manufacture the finest Gin Poles in the world with a 100% safety rating worldwide, LMS Gin Poles are manufactured with steel or aluminum in all sizes. Custom models build for elevator transport for rooftop antennas and towers.  Poles are built are round poles, (GP) triangle poles, (PT), and square poles with jump tracks, (PS). Our poles are Electrostatic coated for long life and ease of handling and safety. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Manufactured to ANSI/TIA-322

  • AWS Certified
  • U.S. AWS Certified welder assembled
  • U.S. Certified Gin Pole AWS welder assembled
  • Certified AWS independent U.S. contractor inspected
  • AWS D1.1:2015 structural welding code-steel compliance
  • Load charts are pole specific with matching serial numbers
  • 5.0   Analysis and design of Gin Poles
  • 6.0   Gin Pole construction
  • Rooster head
  • Roller tail
  • Round poles are not man-rated

Gin Pole pipe mount with rooster head designed for those light antenna picks

LMS 2 Inch Pipe Rooster Head Model: LMS PRH. This rooster head allows operators to operate legally with the confidence of using an approved, engineered and certified pole.

Charts and certifications are retained for the lifetime of the pole if replacements are needed on all Gin-Poles.  Documents are only provided to registered users and bill of sales will also be retained on file to prevent theft.

    • Hoists DAS/LTE antennas up the tower into position for a quick and safe installation
    • Slides into standard 2″ pipe mount
    • Max 250 lbs lift load capacity
    • 4″ sheave with sealed bearings
    • Use with 1/2″ synthetic diameter rope or 3/8″ diameter wire rope
    • Solid steel construction, hot-dipped galvanized finish
    • Serial numbered and registered TIA 322 compliance
    • Made in the USA by an SDVOSB company building the world’s best and safest gin poles.
    • Gin Poles are registered and certified with charts available for registered owners only.

Weights / Dimensions

  • 12.5 Lb / 5.67 Kg Pole weight
  •  Lb /  Kg Wood shipping crate
  • 24″ Long

 OSHA required Forms supplied with all LMS Gin Poles we manufacture.

  • Annual Pole Certification signed and numbered
  • Annual Pole Inspection Report signed and numbered
  • VT Visual Welding Inspection Report, done at the time of manufacture
  • Mill Report
  • Charpy report
  • PE Stamped Pole specific Load Chart to ANSI/TIA-322 standard.

Gin Pole Classifications

 Class Gross Loading Load Line SizeImpact Factor Req’d steel wire rope
A0 < 1,000 Lbsd<= 5/16″1.45
B1,000 < 3,000 Lbs5/16″ < d <= 7/16″1.35
C3,000 < 10,000 Lbs7/16″ < d <= 9/16″1.25
D10,000 + Lbsd > 9/16″1.20
Serial numbers on Pulleys must match the serial number of the Gin Pole. This will be required to complete the annual Gin Pole Inspection. All gin poles using a load line other than steel shall be classified as class A Gin Poles for all load line diameters.

We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers, and nuts only. Remember to inspect before re-using

Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years. Annual inspection reports shall be maintained for a minimum of two years. All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36, Maintain your required documents along with work plan, engineer sign-off for each specific job.  

Certified Green Gin Poles are manufactured 100% from USA recycled steel.