LMS GP 30 GIN POLE, 3 PART
Manufactured to ANSI/TIA-322
- AWS Certified
- U.S. AWS Certified welder assembled
- U.S. Certified Gin Pole AWS welder assembled
- Certified AWS independent contractor inspected
- AWS D1.1:2015 Structural welding code-steel compliance
- Load charts are pole specific with matching serial numbers
- 5.0 Analysis and design of Gin Poles
- 6.0 Gin Pole construction
- Rooster head / Chicago end option
- Metalized surface
- Round poles are not man-rated GP30 Pole is 30′ long and can be used as 10′ 20′ OR 30′ W
- Rooster head fits on all sections
- Gin Pole tail roller end fits on all sections
- 550 Lb / 249 Kg 30′ pole weight
- 383 Lb / 174 Kg 20″ pole weight
- 1150 Lb / 521 Kg Shipping weight
- 10′ pole section weight TBD
OSHA required forms supplied with gin poles we manufacture.
- Annual Pole Certification signed and numbered
- Annual Pole Inspection Report signed and numbered
- VT Visual Welding Inspection Report, done at time of manufacture
- Mill Report on steel specification ASTM A500, Grade B/C
- Charpy report on steel temperature test to –40 degrees
- PE Stamped Pole specific Load Chart
Gin Pole Classifications
|Class||Gross Loading||Load Line Size||Impact Factor Req’d steel wire rope|
|A||0 < 1,000 Lbs||d<= 5/16″||1.45|
|B||1,000 < 3,000 Lbs||5/16″ < d <= 7/16″||1.35|
|C||3,000 < 10,000 Lbs||7/16″ < d <= 9/16″||1.25|
|D||10,000 + Lbs||d > 9/16″||1.20|
We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers and nuts only. Remember to inspect before re-using
Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years. Annual inspections reports shall be maintained for a minimum of two years. All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36, Maintain your required documents along with work plan, engineer sign off for each specific job.
Certified Green Gin Poles are manufactured 100% from USA recycled steel.
Certified SDVOSB | Minority owned company
Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C. All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone. Support our efforts as we support your freedom.
Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.