pagelmslogobanner

LMS GPA 20 HD GIN POLE

ALUMINUM LIGHTWEIGHT DESIGNED IN ACCORDANCE WITH ANSI/TIA-322

Manufactured to ANSI/TIA-322

  • AWS certified
  • U.S. AWS certified welder assembled
  • U.S. Certified gin pole AWS welder assembled
  • Certified AWS independent U.S. contractor inspected
  • AWS D1. 1:2015 structural welding code-steel compliance
  • Load Charts are pole specific with matching serial numbers
  • 5.0 Analysis and design of gin poles
  • 6.0 Gin pole construction
  • Round Poles are not man-rated

OSHA required Forms supplied with gin poles we manufacture.  

  • Annual Pole Certification signed and numbered
  • Annual Pole Inspection Report signed and numbered
  • VT Visual Welding Inspection Report, done at the time of manufacture
  • Mill Report on steel specification ASTM A500, Grade B/C
  • Charpy report on steel temperature test to –40 degrees
  • PE Stamped Pole specific Load Chart to ANSI/TIA-322 standard,  All others are obsolete 

Weights

  • 88 Lb / 40 Kg Pole Weight
  • 288 Lb / 131 Kg Shipping Weight

Gin Pole Classifications

 Class Gross Loading Load Line SizeImpact Factor Req’d steel wire rope
A0 < 1,000 Lbsd<= 5/16″1.45
B1,000 < 3,000 Lbs5/16″ < d <= 7/16″1.35
C3,000 < 10,000 Lbs7/16″ < d <= 9/16″1.25
D10,000 + Lbsd > 9/16″1.20
All gin poles using a load line other than steel shall be classified as class A Gin Poles for all load line diameters.

We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers and nuts only. Remember to inspect before re-using.

Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years. Annual inspections reports shall be maintained for a minimum of two years. All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36, Maintain your required documents along with work plan, engineer sign off for each specific job.