SQUARE GIN POLES
Gin Pole Classifications
Class A 0 < 1,000-pounds gross loading
Class B 1,000 < 3,000-pounds gross loading
Class C 3,000 < 10,000-pounds gross loading
Class D 10,000 pounds and over gross loading
WARNING: Our Triangular and Square Gin specifications and the gross load “when lifting personnel shall not exceed 50% of the charted safe lifted loads. No other construction loads shall be lifted with personnel”
- AWS CERTIFIED
- U.S. AWS CERTIFIED WELDER ASSEMBLED, NON-AISC
- U.S. CERTIFIED GIN POLE AWS WELDER ASSEMBLED
- CERTIFIED AWS INDEPENDENT U.S. CONTRACTOR INSPECTED
- MEETING AWS D1.1:2015 STRUCTURAL WELDING CODE-STEEL
- LOAD CHARTS ARE POLE SPECIFIC WITH MATCHING SERIAL NUMBERS
- 5.0 ANALYSIS AND DESIGN OF GIN POLES
- 6.0 GIN POLE CONSTRUCTION
- ROOSTER HEAD
- ROLLER END OPTION
- METALIZED SURFACE
OSHA required Forms supplied with all LMS gin poles we manufacture.
- Annual Pole Certification signed and numbered
- Annual Pole Inspection Report signed and numbered
- VT Visual Welding Inspection Report, done at the time of manufacture
- Mill Report on steel specification ASTM A500, Grade B/C
- Charpy report on steel temperature test to –40 degrees
- PE Stamped Pole specific Load Chart
- Complete records of pole inspections and record of Magnetic particle inspections shall be performed on 10% of the welded connections every 10 years.
- Annual inspection reports shall be maintained for a minimum of two years.
- “Load carts are not interchangeable” and do not match older models. Load Charts supplied are pole specific with serial numbers matching pole and expire with annual inspection certification.
- All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36 Maintain your required documents along with the work plan, and engineer sign-off for each specific job.
Certified Green Gin Poles are manufactured 100% from USA recycled steel.