pagelmslogobanner

LMS PS 24 GIN POLE

LMS PS 24 Gin Pole manufacturing, servicing, inspections, and repairs we are the primary source for these services for all of the Americas since 2011.  We manufacture the finest Gin Poles in the world with a 100% safety rating worldwide, LMS Gin Poles are manufactured with steel or aluminum in all sizes. Custom models build for elevator transport for rooftop antennas and towers.  Poles are built are round poles, (GP) triangle poles, (PT), and square poles with jump tracks, (PS). Our poles are Electrostatic coated for long life and ease of handling and safety. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Manufactured to 

  • AWS certified
  • U.S. AWS certified welder assembled
  • U.S. Certified gin pole AWS welder assembled
  • Certified AWS independent U.S. Contractor inspected
  • AWS D1.1:2015 structural welding code-steel compliance
  • Load Charts are pole specific with matching serial numbers
  • 5.0 Analysis and design of gin poles
  • 6.0 Gin pole construction
  • Roller / Chicago end option
  • Metalized surface

Weights

  • 500 Lb / 227 Kg Jump Tract  
  • 1450 Lb / 658 Kg Top Section 
  • 1350 Lb / 612 Kg Mid Section 
  • 1200 Lb / 544 Kg Tail Section
  • 1000 Lb / 454 Kg Lower Section 
  • 300 Lb / 136 Kg Rooster Head w/o bearing
  • 5800 Lb /  Kg Total Weight 

Standard section “not for jump use” 20 ft / 6m long, weight 930 lb / 422 Kg

Weights

  • 500 Lb / 227 Kg Jump Tract  
  • 1450 Lb / 658 Kg Top Section 
  • 1350 Lb / 612 Kg Mid Section 
  • 1200 Lb / 544 Kg Tail Section
  • 1000 Lb /454 Kg Lower Section 
  • 300 Lb / 136 Kg Rooster Head w/o bearing
  • 6800 Lb /  Kg Total Weight 

Standard section “not for jump use” 20′ / 6m long, weight 930 Lb / 422 Kg

Weights

  • 500 Lb / 227 Kg Jump Tract  
  • 1450 Lb / 658 Kg Top Section 
  • 1350 Lb / 612 Kg Mid Section 
  • 1200 Lb / 544 Kg Tail Section
  • 1000 Lb / 454 Kg Lower Section 
  • 300 Lb / 136 Kg Rooster Head w/o bearing
  • 8150 Lb / 3697 Kg Total Weight 

Standard section “not for jump use” 20′ / 6m long, weight 930 Lb / 422 Kg

Weights

  • 500 Lb / 227 Kg Jump Tract  
  • 1450 Lb / 658 Kg Top Section 
  • 1350 Lb / 612 Kg Mid Section 
  • 1200 Lb / 544 Kg Tail Section
  • 1000 Lb / 454 Kg Lower Section 
  • 300 Lb / 136 Kg Rooster Head w/o bearing
  • 9500 Lb /  Kg Total Weight 

OSHA required Forms supplied with all LMS gin poles we manufacture.

  • Annual Pole Certification signed and numbered
  • Annual Pole Inspection Report signed and numbered
  • VT Visual Welding Inspection Report, done at time of manufacture
  • Mill Report on steel specification ASTM A500, Grade B/C
  • Charpy report on steel temperature test to –40 degrees
  • PE Stamped Pole specific Load Chart

Gin Pole Classifications

 Class Gross Loading Load Line SizeImpact Factor Req’d steel wire rope
A0 < 1,000 Lbsd<= 5/16″1.45
B1,000 < 3,000 Lbs5/16″ < d <= 7/16″1.35
C3,000 < 10,000 Lbs7/16″ < d <= 9/16″1.25
D10,000 + Lbsd > 9/16″1.20
Sample charts are pole specific with serial numbers.
Serial numbers on Pulleys must match the serial number of the Gin Pole. This will be required to complete the annual Gin Pole Inspection. All gin poles using a load line other than steel shall be classified as class A Gin Poles for all load line diameters.

We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers and nuts only. Remember to inspect before re-using.

Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years. Annual inspections reports shall be maintained for a minimum of two years. All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36, Maintain your required documents along with work plan, engineer sign off for each specific job.