pagelmslogobanner

CRANK UP MASTS

LMS Crank Up Masts Mobile Tower, which goes up to 72 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. LMS Crank Up Masts Mobile Tower Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

TRAILER MOUNTED

WIND RATED TO 105 MPH WITH TWO FLAT-PANEL ANTENNAS GUYED TO OUTRIGGERS
WIND RATING SUBSTANTIALLY INCREASED WHEN GUYED TO OTHER PER ENGINEER
UP TO 72′ STEEL CRANK UP TELESCOPIC MAST
39″ T-BAR TOP MOUNT FOR ANTENNA PLACEMENT / OTHER OPTIONS AVAILABLE
HEAVY-DUTY MAST AND BASE
ALL TUBING 1/4″ THICK WALL
150Lb HEAD-LOAD
EXCLUSIVE DELRIN GUIDE STABILIZATION WITHIN SECTIONS
HIGH WIND ALL-TERRAIN OFF-ROAD APPLICATIONS
NESTED HEIGHT 48″ WITH REAR-MOUNTED NESTING PEDESTAL
ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
24 HOUR SUPPORT
OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED AND SHRINK-WRAPPED OPTION
MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
2 Ea 4000LB LIFT, 12 VOLT ELECTRIC WINCHES W/REMOTE
2 Ea WINCH COVERS, WATERPROOF AND DUSTPROOF
LMS PATENT-PENDING TRAILER DESIGN
6′ X 16′ CUSTOM FLATBED DESIGN
DIAMOND PLATE 11 GAUGE DECKING WITH WATERFALL SIDES ADDING STRENGTH
WATERFALL EDGES GIVING 400% MORE STABILITY
6″ CHANNEL HEAVY DUTY OFF-ROAD CONSTRUCTION
DECK, W/ ADDED SUPPORT UNDER MAST
3″ CHANNEL CROSS MEMBERS ON 16″ CENTERS
4 Ea WELD-ON D-RINGS ON EACH CORNER OF THE  TRAILER
SINGLE AND DUAL  3500 LB  AXLES DEPENDING ON MODEL
15″ WHEELS AND TIRES
5/16″ BALL HITCH, REMOVABLE
2 Ea- SAFETY CHAINS
PULL OUT OUTRIGGERS ON 4 CORNERS
WELDED ON GROUND POINTS
D RING WELDED FOR FRONT GUY POINT
4 Ea 8000 Lb JACKS ON OUTRIGGERS
OUTRIGGER JACKS WITH LOCKING HANDLES FOR ADDED SECURITY
4 EA LOCKING OUTRIGGER SAFETY CHAIN
BATTERY BREAKAWAY
FULL-SIZE SPARE TIRE MOUNTED ON SIDE OF FRONT YOKE
BLACK EPOXY FINISH
REAR UPRIGHT MAST SUPPORT WELDED TO BED
US DOT AND CANADIAN CERTIFIED W/ LED LIGHTING
BUILT ON STEP W/STEP UP HANDHOLD
LMS BLACK BOX – ELECTRIC WINCH OPTION
1 Ea 32″x 118″ x 15″ WATERPROOF BOX FOR ELECTRIC COMPONENT
2 Ea PS4000 4000 LB LIFT, 12 VOLT ELECTRIC WINCHES WITH REMOTE
1 Ea DEEP CYCLE 12 VOLT BATTERY
1 Ea 80 AMP BATTERY CHARGER
1 Ea HANDHELD WINCH CONTROLLER
LMS SOLENOIDS AND WIRING FOR 12 VOLT BATTERY SYSTEM
LMS BLUE BOX
4 Ea STABILIZER JACKS
1 Ea GUY KIT IN BLUE NYLON BAG ( 4 TECHNORA ROPES W/4 EACH tensioner
2 Ea WINCH COVERS

SHIPPING DIMENSIONS

3,500LB SHIPPING WEIGHT
22′.5″ LONG
72″ WIDE
7′.5″ TALL
HEIGHT WITH TIRES TO TOP OF DECK 33 1/2″, WITHOUT 24 7/8
2 EA PER 40′ CONTAINER
3 EA FLATBED TRANSPORT SAME COST AS ONE
GVWR is 7000 lbs. trailer weighs 3605 lbs… usable 3395 lbs.

SOLAR OPTIONS / WI-FI FULL INTEGRATION

SOLAR ELECTRIC SYSTEM 100%
TURNKEY DESIGN W/ADJUSTABLE 480 WATT SOLAR ARRAY
PRE-WIRED LOCKABLE POWER WHITE ENCLOSURE
40″X 42″ X 16″  W/24 VOLT / DC 110 Ah BATTERY BANK
CHARGE CONTROLLER
SURGE PROTECTION
CIRCUIT BREAKERS FOR SOLAR
BATTERY AND LOAD BANKS INCLUDED
OPERATOR PANEL 24/48 VOLT / DC CONVERTER
4 AMP CIRCUIT BREAKER UPGRADE
PANELS MOUNTED ON STEEL TUBING FRAME
SOLAR CONTROL BOX INTEGRATED W/ CLIENTS EQUIPMENT
UNITS BUILT SPECIFICALLY FOR MIDDLE EAST DEPLOYMENTS

PAINT OPTIONS/ CHOICE OF COLOR

  • Polyurethane
  • Complete trailer primed with inorganic zinc conforming to MDDOD-P-23236A, Coated with an epoxy polyamide coat conforming to MS MILL-P2441 formula 150 and urethane topcoat conforming L-P MS MILL-C-85285. All tower assembly hardware is galvanized or eco HCF green coated for stand-alone corrosion resistance.

Crack-Up Tower Models

LMS 20 Crank Up Mast

LMS 30 Crank-Up Mast

LMS 30 Skid Crank-Up Mast

LMS 50 Crank Up Mast

LMS 60 Crank-Up Mast

LMS 60 LP Crank Up Mast

Landa Mobile Systems meets or exceeds process and testing in  Low Temperature in accordance with Mil-Std-810 Procedure II :  Operational cold start and/or Storage, High Temperature in accordance will Mil-Std-810 procedure I with solar loading., Salt Fog or Humidity in accordance with Mil-Std-810 Method 507.4. Blowing Rain in accordance with Mil-Std-810 method 506.4, Blowing Sand and dust – In accordance with Mil-Std-810 method 510.4 procedure II., Transport shock,  Transport vibration, Military Trans-portability Testing,  Meets DOT specs., Shock and vibe test for ruggedness Mil-810., Height & Weight distribution testing, Braking & Handling, Grading/Slope @ 10-30%,  Steering & Handling, Turning diameter,  Static roll-over, Stability & Handling,  Towing compatibility.