pagelmslogobanner

LMS 106 PT TRUCK MOUNTED TOWER

LMS 106 PT Truck Mounted Tower, which goes up to 106 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs.  Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Lattice Tower

  • 106’ tall with 6 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty also
  • Tilt base assembly integrated into the trailer. Lifetime Warranty also
  • 3 sector antenna mount, custom mount designs are also available
  • 5’ Starr mount for large microwave dish placement with torque arm  Lifetime Warrantyalso
  • Tower and tilt assembly painted finish for all-weather also
  • 1 minute from horizontal to vertical with 950 Lb customer’s head load.
  • 900:1 and 446:1 adjustable worm drive motor  
  • 11 minutes to full tower erection with single-stage process
  • Galvanized heavy-duty lifting and pull-down drums also
  • 110VAC 60HZ or optional 240VAC 50HZ
  • 7 ea. cable guide rings Lifetime Warranty
  • Patented derlin mast guide blocks
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality  also
  • Cables certified 14,000LB break strength also
  • All cables have been marinated in LPS3 for anti-corrosion also
  • 4″, 5″, and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3 also
  • All Eco-Guard (TM) eco coated grade 9 bolts also
  • Units are designed to withstand-120/ 160 degrees Fahrenheit

Tower Safety Features

  • The backup emergency key operation also
  • 3 ea. heavy duty upper and lower limit switches also
  • Weatherproof (locking) control panel with ingress protection IP65 also
  • 2 ea. switches for total deployment control
  • 1 ea. red keyed power disconnect for all function controls also
  • 2 ea. illuminated function lamps for tilting and telescopic also
  • Theft-proof cable storage reel with grease nipple. Lifetime Warranty also
  • Galvanized safety end caps covering rotatable components also
  • 25′ full operation remote control cable option

Truck Specifications

  • 2019 International 4300 also
  • The base chassis model is model 14300 SBA 4 x 2 with 272.00 wheelbases, 204.90 CA, and 116.00 axles to frame.
  • Tow hook, front (2) frame-mounted also
  • Wheelbase range 256″ through and including 311″ also
  • Axle, front non-driving I-Beam type, 12,000Lb capacity with shock absorbers
  • Brake system, Air dual systems for straight truck applications also
  • Air brake ABS, full vehicle wheel control system also
  • Actuated parking brake also
  • Air compressor, 18.7 CFM capacity also
  • Exhaust system single, horizontal, after treatment device, frame-mounted under right rail, back of the cab, includes short, horizontal tailpipe
  • Electrical system 12-volt, standard equipment also
  • Maintenance-free (2) 12-volt battery system also
  • Halogen headlights also
  • Chrome grille also
  • GVWR limited to 25,999 Lb, the special rating also
  • Frame GVWR limited to 32,900 Lb; 12,00 Lb front axle will be de-rated to 11,000 Lb capacity; when applicable
  • Diesel engine; Cummins B6.7 300; EPA 2017, 300 HP @ 2600 RPM, 660 Lb-Ft torque @ 1600 RPM, 2600
  • Automatic transmission, 6 speed with double overdrive with PTO provision
  • Conventional cab also
  • Air conditioning with integral heater also
  • Power window and door locks
  • Total truck weight 25,140 Lbs also

Generator Specifications

  • Model: APD-ULJ30
  • Engine make: John Deere; in-line; 4 cycle
  • 60Hz, 188 RPM
  • 12 V system
  • Direct injection
  • An IP65 rating offers increased resistance to water
  • Unbalanced load protection
  • Heavy-duty steel enclosure
  • Heavy-duty steel base frame
  • Emergency stop button
  • Flex-fuel lines
  • Protection covers for rotating parts
  • Operations manual

Skid Dimensions

  • Length: 72″
  • Width w/o lift hook: 39.4″
  • Height: 45.11″
  • Dry weight: 1800 Lb

Fuel Tank

  • 24HR (65 Gal)
  • 112 / 39.4 / 9
  • Weight 900 Lb

Truck Bed

  • 25′ Long
  • 8′ Wide
  • 4″ channel frame
  • 3″ cross members
  • Needle-bearing outriggers, 12,000 Lb jacks (4)
  • Galvanized 2″ x 2″ outrigger jack pads (4)
  • Tamper-proof lacking outrigger jacks (4)
  • Tube ground rod attach point holders welded to outriggers (4)
  • 1 ground rod storage tube built-in trailer deck, green cap
  • Sprayed with 1/4″ line-x deck
  • 2 ea 4′ steel locking under bed toolboxes

Lifetime Warranty as described on website http://jzy.f08.mywebsitetransfer.com/company/lms-warranty

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY-OWNED COMPANY

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters in the Americas, thanks to team efforts and most important our customers support. “Service-disabled veteran-owned company built in America by Americans.” Minority owner and plant located in the HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.