LMS 150 XHD MOBILE TOWER

LMS 150 XHD Mobile Tower, which goes up to 150 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs.  Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Lattice Tower

• 150’ tall with 6ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
• Tilt base assembly integrated into the trailer. Lifetime Warranty
• 3 sector antenna mount, custom mount designs are also available
• 5’ Starr mount for large microwave dish placement with a torque arm, Optional item Lifetime Warranty.
• 16 ea ½” x 4” stiffener plates Lifetime Warranty.
• 900:1 and 446:1 adjustable worm drive motor
• Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
• Hydraulic tilt has a manual backup hand pump
• Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor, and hydraulic gearbox assembly.
• 1 minute from horizontal to vertical with 2,000LB customer’s head load
• 110VAC 60HZ or optional 240VAC 50HZ
• 7 ea. cable guide rings Lifetime Warranty
• Patented derlin mast guide blocks
• Galvanized heavy-duty lifting and pull-down drums
• All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
• All cables have been marinated in LPS3 for anti-corrosion
• 4″, 5″, and 6″ galvanized plated steel smart custom bearings fitted pulleys also marinated in LPS3
• All Eco-Guard (TM) eco coated grade 9 bolts
• All units are designed to withstand-120/ 160 degrees Fahrenheit

Tower Safety Features

• The backup emergency key operation
• 3 ea. heavy duty upper and lower limit switches
• Weatherproof (locking) control panel with ingress protection IP65
• 2 ea. switches for total deployment control
• 2 ea. illuminated function lamps for tilting and telescopic
• 1 ea. red keyed power disconnect for all function controls
• Theft-proof cable storage reel with grease nipple. Lifetime Warranty
• Galvanized safety end caps covering rotatable components
• 25′ full operation remote control cable option

Tower Trailer

• Structural outriggers. Lifetime Warranty
• Diamond plate, 11 gauge deck
• Electrical components bonded tor frame for system grounding
• All steel construction 10″ wide beam construction, no aluminum
• 11 hold adjustable hitch coupler channel. Lifetime Warranty
• Removable 2 5/16″ ball hitch and pintle included
• 7 blade type connectors
• 12,000LB side pull spring-loaded tongue jack
• Two-hole 1/0 ground lugs (2 Ea)
• Heavy-duty safety chains (2 Ea)
• Tube ground rod attach points welded to outriggers (4 Ea)
• Ground rod storage tube built-in trailer deck, green cap (1Ea)
• Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
• Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
• Slide outriggers with needle bearing for easy pull-out. (6 Ea)
• Tamper-proof locking outrigger jacks. (6 Ea)
• Bubble type trailer level guides (6 Ea)
• 7,000Lb axles each electric brake (3 Ea)
• Torsion axle independent suspension also
• 7 ea 16 plies 215-75-17.5 radial tires
• 7 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
• Mudflaps
• 12 position guy kit, option for many more
• Unguided footprint same as outrigger footprint
• Outriggers with lockouts and safety chains on all to prevent a slide-out in transport
• LMS 150 HW CR TOP VIEW2

  LMS 150 XHD CR GOING UP

LMS 150 CR is a 150′ model and “container shippable.”

Trailer Safety Features

• 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
• Anti-theft removable tongue. Lifetime Warranty
• Emergency trailer break-away device
• Full-size spare under deck
• All-weather padlocks and hide-a-key
• 6 sets wheel loose nut indicators
• 1 ea trailer step-up, with 1 ea step handrail
• Flashing emergency lights
• DOT and transport Canada LED lighting package and reflective tape.
• 36” steel locking aluminum powder coated black diamond plate toolbox secured
• Decks water-fall sides add 400% to strength Vs. Flat steel welded to rail. Lifetime Warranty
• 6 ea telescoping outriggers with safety chains and lockdown handles preventing unauthorized adjustments Lifetime Warranty

Additional Features

• Equipped with lifting hooks in all four corners for a helicopter lift
• Removable tongue for transport and anti-theft
• Comprehensive operations manual
• Best warranty in the industry and Lifetime Warranty
• 24-hour support
• High wind all-terrain off-road applications
• It can be pulled with a standard 3/4 ton truck
• Build for rough inaccessible terrain applications
• Engineered and designed to meet the rigor demand of all military environmental