LMS 178 XHD MOBILE TOWER
LMS 178 XHD Mobile Tower, which goes up to 178 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in. Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE
Lattice Tower
- 178’ tall with 8ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel
- Tilt base assembly integrated into the trailer
- 3 sector antenna mount, custom mount designs are also available
- 5’ Starr mount optional large microwave dish placement with a torque arm
- Tower and tilt assembly painted finish for all-weather
- 1500:1 and 446:1 adjustable worm drive motor
- Hydraulic tilt has a manual backup hand pump
- 90 second minutes from horizontal to vertical with 2,000LB
- 1 hour 15 minutes for a full tower erection
- 110VAC 60HZ or optional 240VAC 50HZ
- 10 ea. cable guide rings
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″, and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit
- Outrigger stabilizer kit
Tower Safety Features
- The backup emergency key operation
- 3 ea. heavy duty upper and lower limit switches
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. illuminated function lamps for tilting and telescopic
- 1 ea. red keyed power disconnect for all function controls
- Theft-proof cable storage reel with grease nipple
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Gooseneck trailer or fifth wheel only
- Structural outriggers.
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding
- All steel construction wide beam construction
- 11 hole adjustable hitch coupler channel
- 7 blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
- Slide outriggers with needle bearing for easy pull-out. (6 Ea)
- Tamper-proof locking outrigger jacks. (6 Ea)
- Bubble type trailer level guides (6 Ea)
- 8,000Lb axles each electric brake (3 Ea)
- 6 ea outriggers with 12,000lb locking leveling jacks
- 4 ea 12,000lb deck-leveling jacks
- 7 ea 16 plies 215-75-17.5 radial tires
- 7 ea 17.50 powder-coated solid steel wheels
- Mud-flaps
- 12 position guy kit
- Unguided footprint the same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hide-a-key
- 6 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape
- 2 ea 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. flat steel welded to rail
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Comprehensive operations manual
- High wind all-terrain off-road applications
- Can be pulled with a standard 1-ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks also
- Fuel pumps
LMS 178 XHD Weights and Dimensions
- 24,000 GVWR
- 46′ Long
- 10’ 4″ Tall
- 8′ 6″ Wide
- 37′.5″ X 18′ Deployed footprint / outriggers extended
Lifetime Warranty as described on website http://jzy.f08.mywebsitetransfer.com/company/lms-warranty
Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber, and plastics).