LMS 230 XHD MOBILE TOWER

LMS 230 XHD Mobile Tower, which goes up to 230 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs.  Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Lattice Tower

  • 230’ tall with 8ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel
  • Tilt base assembly integrated into the trailer
  • 3 sector antenna mount, custom mount designs are also available
  • 5’ Starr mount for large microwave dish placement with torque arm o
  • 2 ea torsion rods
  • 16 ea ½” x 4” stiffener plates also
  • Tower and tilt assembly painted finish for all-weather also
  • 900:1 and 446:1 adjustable worm drive motor 
  • Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders also
  • Hydraulic tilt has a manual backup hand pump
  • Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly. also
  • 1 minute from horizontal to vertical with 2,000LB customer’s head load. 
  • 11 minutes to full tower erection with single-stage process
  • 22 minutes with dual-stage process also
  • 110VAC 60HZ or optional 240VAC 50HZ
  • 9 ea. cable guide rings 
  • Patented derlin mast guide blocks
  • Galvanized heavy-duty lifting and pull-down drums
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality  also
  • Cables certified 14,000LB break strength. 
  • All cables have been marinated in LPS3 for anti-corrosion
  • 4″, 5″, and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
  • All Eco-Guard (TM) eco coated grade 9 bolts 
  • All units are designed to withstand-120/ 160 degrees Fahrenheit

Tower Safety Features

  • Backup emergency key operation also
  • 3 ea. heavy duty upper and lower limit switches. also
  • Weatherproof (locking) control panel with ingress protection IP65
  • 2 ea. switches for total deployment control 
  • 2 ea. illuminated function lamps for tilting and telescopic. 
  • 1 ea. red keyed power disconnect for all function controls
  • Theft-proof cable storage reel with grease nipple
  • Galvanized safety end caps covering rotatable components 
  • 25′ full operation remote control cable option 

Tower Trailer

  • Structural outriggers
  • Diamond plate, 11 gauge deck
  • Electrical components bonded tor frame for system grounding also
  • All steel construction 10″ wide beam construction, no aluminum also
  • 11 hold adjustable hitch coupler channel
  • Removable 2 5/16″ ball hitch and pintle included. also
  • 7 blade type connectors also
  • 12,000LB side pull spring-loaded tongue jack   also also
  • Two-hole 1/0 ground lugs (2 Ea) also
  • Heavy-duty safety chains (2 Ea)  also
  • Tube ground rod attach points welded to outriggers (4 Ea) also
  • Ground rod storage tube built-in trailer deck, green cap (1Ea)
  • Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
  • Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
  • Slide outriggers with needle bearing for easy pull-out. (6 Ea) also
  • Tamper-proof locking outrigger jacks. (6 Ea) also
  • Bubble type trailer level guides (6 Ea)
  • 7,000Lb axles each electric brake (3 Ea) also
  • Torsion axle independent suspension
  • 7 ea 16 ply 215-75-17.5 radial tires also
  • 7 ea 17.50 powder-coated solid steel wheels
  • Mudflaps 
  • 12 position guy kit
  • Unguided footprint same as outrigger footprint

Trailer Safety Features

  • 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
  • Anti-theft removable tongue
  • Emergency trailer break-away device
  • Full-size spare under deck
  • All-weather padlocks and hide-a-key
  • 6 sets wheel loose nut indicators 
  • 1 ea trailer step-up, with 1 ea step handrail 
  • Flashing emergency lights 
  • DOT and transport Canada LED lighting package and reflective tape. also
  • 36” steel locking aluminum powder coated black diamond plate toolbox secured
  • Decks water-fall sides add 400% to strength Vs. flat steel welded to rail

Additional Features 

  • Equipped with lifting hooks in all four corners for helicopter lift also
  • Removable tongue for transport and anti-theft. also
  • Comprehensive operations manual so
  • High wind all-terrain off-road applications
  • Can be pulled with a standard 3/4 ton truck 
  • Build for rough inaccessible terrain applications 
  • Engineered and designed to meet the rigor demand of all military environmental

A Few Options

  • Lock-out kit for climber safety
  • Safety climb, for climber safety also
  • Lighting protection 
  • FAA Lighting 
  • Extra reels 
  • Slide-out 
  • Safety rails 
  • Pan adapter 
  • Starr mount 
  • Grounding kit
  • Tower covers also 
  • Generators also 
  • Fuel tanks also
  • Fuel pumps also
  • Lighting protection kit also
  • Hydraulic tilt backup hand pump also

LMS 230 XHD Weights and Dimensions 

  • TBD Lbs shipping weight
  • TBD Lbs Useful load 
  • 21,000 GVWR
  • 46′ Long 
  • 10’ 4″ Tall 
  • 8′ 6″ Wide 
  • 37′.5″ X 18′ Deployed footprint / outriggers extended 

LMS 230 SM PRODUCT DESCRIPTION

Lifetime Warranty as described on website http://jzy.f08.mywebsitetransfer.com/company/lms-warranty

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil, and Gas Flare Towers, and Portable Shelters in the Americas, thanks to team efforts and most important our customer support.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans, and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.