LMS 85 HWLB MOBILE TOWER
LMS 85 HWLB Mobile Tower, which goes up to 85 feet is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. Platform safety includes LineX sprayed decks, locking outrigger, and jacks. Grounding lugs and ground rods built-in. Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE
Lattice Tower
- 85’ tall with 5 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel.
- Tilt base assembly integrated into the trailer.
- 3 sector antenna mount, custom mount designs available
- 5’ Starr mount for large microwave dish placement with torque arm
- Tower and tilt assembly painted finish for all-weather
- 1 minute from horizontal to vertical with 950 lb. customer’s head load.
- 900:1 and 446:1 adjustable worm drive motor
- 16 minutes to full tower erection
- Galvanized heavy-duty lifting and pull-down drums
- 110VAC 60HZ or optional 240VAC 50HZ
- 6 ea. cable guide rings
- Patented derlin mast guide blocks
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
- Cables certified 14,000LB break strength
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″, and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- Units are designed to withstand-120/ 160 degrees Fahrenheit
Tower Safety Features
- The backup emergency key operation
- 3 ea. heavy duty upper and lower limit switches
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 1 ea. red keyed power disconnect for all function controls
- 2 ea. illuminated function lamps for tilting and telescopic
- Theft-proof cable storage reel with grease nipple.
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers.
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding
- All steel construction 10″ wide beam construction, no aluminum
- 11 hold adjustable hitch coupler channel.
- Removable 2 5/16″ ball hitch and pintle included.
- 7 blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
- Slide outriggers with needle bearing for easy pull-out. (6 Ea)
- Tamper-proof locking outrigger jacks. (6 Ea)
- Bubble type trailer level guides (6 Ea)
- 8,000Lb axles each electric brake (3 Ea)
- Torsion axle independent suspensions
- 7 ea 16 ply 215-75-17.5 radial tires
- Mudflaps
- 7 ea 17.50 powder-coated solid steel wheels.
- 12 position guy kit
- Unguided footprint same as outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue.
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hid-a key
- 4 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape.
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. flat steel welded to rail.
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft.
- Comprehensive operations manual
- High wind all-terrain off-road applications
- Can be pulled with a standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 85 HWLB Weights and Dimensions
- 12,560 Lbs shipping weight
- 46’ Long, total unit
- 10’ 4″ Tall
- 8′ 6″ Wide
- 11,440 Lbs useful load
- 24,000 GVWR
- 26′ Tower retracted height
- 2500 Lb Tilt head load
- 2500 Lb Headload
LMS 85 HWLB PRODUCT DESCRIPTION
