Skip to content
LMS 65 CRS “CONTAINER READY SHORT” MOBILE TOWER
LMS 65 CRS Mobile Tower Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. Platform safety includes LineX sprayed decks, locking outriggers, and jacks. Grounding lugs and ground rods are built-in. Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE. You can also find other LMS news HERE.
Lattice Tower
65’ tall with 4 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
- Tilt base assembly integrated into the trailer. Lifetime Warranty
- Three-sector antenna mount and custom mount designs are also available
- 5’ Starr mount for large microwave dish placement with torque arm, option Lifetime Warranty.
- 16 ea ½” x 4” stiffener plates Lifetime Warranty.
- Tower and tilt assembly painted finish for all-weather
- 900:1 and 446:1 adjustable worm drive motor
- Tilted to vertical by two ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
- Hydraulic tilt has a manual backup hand pump.
- The tower is elevated by 1.5HP, wash downrated, direct-drive stainless shaft winch motor, and hydraulic gearbox assembly.
- 1 minute from horizontal to vertical with 2,000lbcustomer head load
- 110VAC 60HZ or optional 240VAC 50HZ
- Five ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
- Cables certified 14,000LB break strength.
- All cables have been marinated in LPS3 for anti-corrosion
- All Eco-Guard (TM) eco-coated grade 9 bolts
- All units are designed to withstand 120/ 160 degrees Fahrenheit
Tower Safety Features
- The backup emergency key operation
- Three ea. Heavy-duty upper and lower limit switches.
- Weatherproof (locking) control panel with ingress protection IP65
- Two ea. switches for total deployment control
- Two ea. Illuminated function lamps for tilting and telescopic.
- One ea. red keyed power disconnect for all function controls
- Theft-proof cable storage reel with grease nipple. Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Outrigger stabilizer kit included.
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded to frame for system grounding
- All steel construction, 10″ wide beam construction, no aluminum
- 11-hold adjustable hitch coupler channel. Lifetime Warranty
- Removable 2 5/16″ ball hitch and pintle included
- Seven-blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (4 Ea)
- Slide outriggers with needle bearings for easy pull-out. (4 Ea)
- Tamper-proof locking outrigger jacks. (4 Ea)
- Bubble-type trailer level guides (4 Ea)
- 8,000Lb axles for each electric brake (2 Ea)
- Torsion axle independent suspensions
- Five ea 16 plies 215-75-17.5 radial tires
- Five ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
- Mudflaps
- 12-position guy kit
- The unguided footprint is the same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X was sprayed on the full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue. Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hid-a key
- Four sets of wheel loose nut indicators
- One ea trailer step-up, with one ea step handrail
- Flashing emergency lights
- DOT and Transport Canada LED lighting package and reflective tape
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks’ water-fall sides add 400% to strength vs. Flat steel welded to rail. Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft.
- Comprehensive operations manual
- Best warranty in the industry and Lifetime Warranty
- 24-hour support HOUR SUPPORT
- High wind all-terrain off-road applications
- It can be pulled with a standard 3/4 ton truck
- Build for rough, inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tank
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 65 CRS Weights and Dimensions
- Fits in a 20ft container / or two units in a 40ft container
- 10880 Lb shipping weight (est)
- 6100 Lbs empty trailer
- 16,000 Lbs GVWR
- 5120 Lbs trailer useful load (est)
- 18’2″ deck length, the removable tongue
- 19’3″ shipping overall length
- 7′ 2″ transport height, horizontal nesting
- 24’3″ overall trailer length
- 7′ 6″ wide trailer
- 5′ removable tongue
- 23′ 2″ total combined trailer length
- 21′ 10″ tower retracted minimum height
- The tower footprint guyed to outriggers is 20′ x 40′
- Using synthetic rope for guys will reduce interference. OPTIONAL
