LMS 106 CR
LMS 106 CR Container Mobile Tower goes up to 106 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. Platform safety includes LineX sprayed decks, locking outriggers, and jacks. Grounding lugs and ground rods are built-in. Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE. You can also find other LMS news HERE.
Lattice Tower
- 106’ tall with 6 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty: best warranty available in the world from any manufacturer.
- Tilt base assembly integrated into the trailer. Lifetime Warranty
- 3 sector antenna mount and custom mount designs are also available
- 5’ Starr mount for large microwave dish placement with torque arm, OPTIONAL Lifetime Warranty.
- Stiffener plates Lifetime Warranty
- Tower and tilt assembly painted finish for all-weather
- Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
- Hydraulic tilt has a manual backup hand pump
- Tower elevated by 1.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly.
- 1 minute from horizontal to vertical
- 22 minutes with the dual-stage process
- 110VAC 60HZ or optional 240VAC 50HZ
- 7 ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
- Cables certified 14,000LB break strength.
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″, and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco-coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit
Tower Safety Features
- Equipped with the backup emergency key operation
- 3 ea. Heavy-duty upper and lower limit switches.
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. Illuminated function lamps for tilting and telescopic.
- 1 ea. red keyed power disconnect for all function controls
- Theft-proof cable storage reel with grease nipple. Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded to frame for system grounding
- All steel construction, 10″ wide beam construction, no aluminum
- 11-hold adjustable hitch coupler channel. Lifetime Warranty
- Removable 2 5/16″ ball hitch and pintle included.
- 7 blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (4 Ea)
- Slide outriggers with needle bearings for easy pull-out. (4 Ea)
- Tamper-proof locking outrigger jacks. (4 Ea)
- Bubble-type trailer level guides (4 Ea)
- 8,000Lb axles for each electric brake (2 Ea)
- Torsion axle independent suspension
- 5 ea 16 plies 215-75-17.5 radial tires
- 5 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
- Mudflaps
- 12-position guy kit
- The unguided footprint is the same as an outrigger footprint
“S” option for coastal applications where corrosion is a major issue or temporary submersion in water. We spray most of the trailer with LineX to prevent rust, put on stainless IP-65 sealed motors, and spray and marinade parts in anti-corrosion solutions specific to landa towers ensuring all are waterproof and trailer water resistant.
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue. Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare
- Locking outriggers with supplied locks for anti-tampering
- All-weather padlocks and hid-a key
- 4 sets of wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and Transport Canada LED lighting package and reflective tape.
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. Flat steel welded to rail. Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft.
- Comprehensive operations manual
- Best warranty in the industry and Lifetime Warranty
- 24-hour support
- High wind all-terrain off-road application
- It can be pulled with a standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Outrigger stabilizer kit for high wind loading is now standard
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 106 CR Weights and Dimensions
- It fits in a 40Ft container
- 11,500 Lbs shipping weight
- 22′ trailer
- 6′ rear overhang
- 11′ x 7′ usable deck space
- 16,000 Lbs GVWR
- 4,500 Lbs trailer useful load
- 32′ long, a total unit
- 7′ 2″ transport height, horizontal nesting
- 7′ 7″ wide
- 26′ tower retracted minimum height
- The tower footprint guyed to outriggers is 20′ x 40′
- Using synthetic rope for guys will reduce interference. OPTIONAL
Lifetime Warranty as described on website http://jzy.f08.mywebsitetransfer.com/company/lms-warranty
Not including standard wear items, i.e., electrical, brakes, tires, bearings, jacks, rubber, and plastics).
Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized and finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 CSA S37 standards. Steel is ASTM A500, grade B/C. All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers, and Portable Shelters in the Americas, thanks to team efforts and, most importantly, our customers’ support. “Service-disabled veteran-owned company built in America by Americans.” Minority owner and plant located in the HUB zone. Please support our efforts as we support your freedom.
Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans, and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741, as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300. www.usedtowers.com
www.landatowers.com