LMS 35 CRS CONTAINER READY SHORT MOBILE TOWER

LMS CRS Container Mobile Towers can reach up to 178 feet and are mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs.  Platform safety includes LineX sprayed decks, locking outriggers, and jacks. Grounding lugs and ground rods are built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE. You can also find other LMS news HERE.

Lattice Tower

  • 35’ tall with 3 ea section galvanized ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
  • All Eco-Guard (TM) eco-coated grade 9 bolts
  • All units are designed to withstand 120/ 160 degrees Fahrenheit
  • Tilt base assembly integrated into the trailer. Lifetime Warranty
  • Three-sector antenna mount custom mount designs are also available
  • 16 ea ½” x 4” stiffener plates Lifetime Warranty
  • Tower and tilt assembly painted finish for all-weather
  • 900:1 worm drive motor
  • Tilted to vertical by two ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
  • Hydraulic tilt has a manual backup hand pump.
  • Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly
  • 1 minute from horizontal to vertical with 2,000Lb customer’s head-load
  • 110VAC 60HZ or optional 240VAC 50HZ
  • Four ea. cable guide rings Lifetime Warranty
  • Patented derlin mast guide blocks
  • Galvanized heavy-duty lifting and pull-down drum
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
  • Cables certified 14,000LB break strength
  • All cables have been marinated in LPS3 for anti-corrosion 

Tower Safety Features

  • The backup emergency key operation 
  • Three ea. heavy-duty upper and lower limit switches
  • Weatherproof (locking) control panel with ingress protection IP65
  • Two ea. switches for total deployment control
  • Two ea. Illuminated function lamps for tilting and telescopic.
  • One ea. red keyed power disconnect for all function controls
  • Theft-proof cable storage reel with grease nipple. Lifetime Warranty
  • Galvanized safety end caps covering rotatable components
  • 25′ entire operation remote control cable option

Tower Trailer

  • Structural outriggers. Lifetime Warranty
  • Diamond plate, 11 gauge deck
  • Electrical components bonded to frame for system grounding
  • All steel construction, 10″ wide beam construction, no aluminum
  • Removable 2 5/16″ ball hitch and pintle included
  • Seven-blade type connectors
  • 12,000LB side pull spring-loaded tongue jack
  • Two-hole 1/0 ground lugs (2 Ea)
  • Heavy-duty safety chains (2 Ea)
  • Tube ground rod attach points welded to outriggers (4 Ea)
  • Ground rod storage tube built-in trailer deck, green cap (1Ea)
  • Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
  • Galvanized 18″ x 18″ outrigger jack pads (4 Ea)
  • Slide outriggers with needle bearings for easy pull-out. (4 Ea)
  • Tamper-proof locking outrigger jacks. (4 Ea)
  • Bubble-type trailer level guides (4 Ea)
  • 8,000lb axles for each electric brake (2 Ea)
  • Torsion axle independent suspensions
  • Five ea 16 plies 215-75-17.5 radial tires
  • Five ea 17.50 powder-coated solid steel wheels Lifetime Warranty
  • Mudflaps
  • 9-position guy kit
  • Unguided footprint the same as the outrigger footprint

Trailer Safety Features

  • 1/4” Line-X was sprayed on the full deck and front of the trailer for anti-slip.
  • Anti-theft removable tongue. Lifetime Warranty
  • Emergency trailer break-away device
  • Full-size spare under deck
  • All-weather padlocks and hid-a key
  • Four sets of wheel loose nut indicators
  • One ea trailer step-up, with one ea step handrail
  • Flashing emergency lights
  • DOT and Transport Canada LED lighting package and reflective tape
  • 36” steel locking aluminum powder coated black diamond plate toolbox secured
  • Decks’ water-fall sides add 400% to strength vs. flat steel welded to rail Lifetime Warranty

Additional Features 

  • Equipped with lifting hooks in all four corners for a helicopter lift
  • Removable tongue for transport and anti-theft.
  • Comprehensive operations manual
  • Best warranty in the industry Lifetime Warranty
  • 24-hour support HOUR SUPPORT
  • High wind all-terrain off-road applications
  • Can be pulled with a standard 3/4 ton truck
  • Build for rough, inaccessible terrain applications
  • Engineered and designed to meet the rigor demand of all military environmental
  • Lock-out kit for climber safety
  • Safety climb, for climber safety
  • Lighting protection
  • FAA Lighting
  • Extra reels
  • Slide-out
  • Safety rails
  • Pan adapter
  • Starr mount
  • Grounding kit
  • Tower covers
  • Generators
  • Fuel tanks
  • Fuel pumps
  • Lighting protection kit
  • Hydraulic tilt backup hand pump

LMS 35 CRS Weights and Dimensions

  • Fits in a 20ft container / or two units 40ft container
  • 9050Lb shipping weight (est)
  • 6100 Lbs empty trailer
  • 16,000 Lbs GVWR
  • 6950Lb trailer useful load (est)
  • 18’2″ deck length, the removable tongue
  • 19’3″ overall length
  • 24’3″ overall trailer length
  • 7′ 6″ wide trailer
  • 5′ removable tongue
  • 23’2″ total combined trailer length