LMS 85 CRS
CONTAINER READY SHORT MOBILE TOWER
Lattice Tower 85′ container ready short (CRS) fits into a 20′ container
- 85’ tall with 5 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty also
- Tilt base assembly integrated into trailer Lifetime Warranty also
- 3 sector antenna mount, custom mount designs also available also
- 5’ starr mount for large microwave dish placement with torque arm Lifetime Warranty also
- 2 ea torsion rods. Lifetime Warranty also
- 16 ea ½” x 4” stiffener plates Lifetime Warranty also
- Tower and tilt assembly painted finish for all-weather also
- 900:1 and 446:1 adjustable worm drive motor also
- Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders Lifetime Warranty also
- Hydraulic tilt has a manual backup hand pump
- Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly also
- 1 minute from horizontal to vertical with 2,000LB customer’s head load
- 11 minutes to full tower erection with the single-stage process
- 22 minutes with the dual-stage process
- 110VAC 60HZ or optional 240VAC 50HZ also
- 6 ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks also
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality cables certified to14,000Lb break strength
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″ and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit also
Tower Safety Features
- The backup emergency key operation
- 3 ea. heavy duty upper and lower limit switches
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. illuminated function lamps for tilting and telescopic
- 1 ea. red keyed power disconnect for all function controls
- Theft proof cable storage reel with grease nipple Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding also
- All steel construction 10″ wide beam construction, no aluminum also
- 11 hold adjustable hitch coupler channel Lifetime Warranty also
- Removable 2 5/16″ ball hitch and pintle included also
- 7 blade type connectors also
- 12,000LB side pull spring-loaded tongue jack also also
- Two-hole 1/0 ground lugs (2 Ea) also
- Heavy-duty safety chains (2 Ea) also
- Tube ground rod attach points welded to outriggers (4 Ea) also
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (4 Ea)
- Slide outriggers with needle bearing for easy pull-out. (4 Ea) also
- Tamper-proof locking outrigger jacks. (4 Ea) also
- Bubble type trailer level guides (4 Ea)
- 8,000Lb axles each electric brake (2 Ea)
- Torsion axle independent suspension
- 5 ea 16 plies 215-75-17.5 radial tires
- 5 ea 17.50 powder-coated solid steel wheels Lifetime Warranty
- Mudflaps
- 12 position guy kit
- Unguided footprint the same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip
- Anti-theft removable tongue Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hid-a key
- 4 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape also
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. flat steel welded to rail Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft
- Comprehensive operations manual
- Best warranty in the industry Lifetime Warranty
- 24-hour support
- High wind all-terrain off-road applications
- Can be pulled with standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 85 CRS Weights and Dimensions
- Fits in a 20ft container
- 11,180Lbs shipping weight (est)
- 16,000 Lbs GVWR
- 4,820 Lbs trailer useful load (est)
- 18’2″ deck length, the removable tongue also
- 19’3″ shipping length
- 7′ 2″ transport height, horizontal nesting
- 24’3″ overall trailer length
- 7′ 6″ wide trailer
- 5′ removable tongue
- 23′ 2″ total combined trailer length
- 22′ 3″ tower retracted minimum height
