Lattice Tower

  • 85’ tall with 5 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty also
  • Tilt base assembly integrated into skid. Lifetime Warranty also
  • 3 sector antenna mount, custom mount designs also available
  • 5’ starr mount for large microwave dish placement with torque arm  Lifetime Warranty. also
  • Tower and tilt assembly painted finish for all weather also
  • 1 minute from horizontal to vertical with 950 Lb customer’s head load.
  • 900:1 and 446:1 adjustable worm drive motor  
  • 11 minutes to full tower erection with single stage process
  • Galvanized heavy duty lifting and pull-down drums also
  • 110VAC 60HZ or optional 240VAC 50HZ
  • 6 ea. cable guide rings Lifetime Warranty
  • Patented derlin mast guide blocks
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality  also
  • Cables certified 14,000LB break strength also
  • All cables have been marinated in LPS3 for anti-corrosion also
  • 4″, 5″ and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3 also
  • All Eco-Guard (TM) eco coated grade 9 bolts also
  • Units are designed to withstand-120/ 160 degrees Fahrenheit also

Tower Safety Features

  • Backup emergency key operation also
  • Heavy duty upper and lower limit switches (3 Ea) also
  • Weatherproof (locking) control panel with ingress protection IP65 also
  • Switches for total deployment control (2 Ea)
  • Red keyed power disconnect for all function controls (1 Ea) alsoso
  • Illuminated function lamps for tilting and telescopic (2 Ea) also
  • Theft proof cable storage reel with grease nipple. Lifetime Warranty also
  • Galvanized safety end caps covering rotatable components also
  • 25′ full operation remote control cable option

Tower Skid 

  • Automatic platform leveling jack system also
  • Diamond plate 11 gauge deck also
  • Decks water-fall sides welded to rail  Lifetime Warranty
  • Electrical components bonded to the frame also
  • 1/4″ line-x sprayed deck also 
  • Open deck space in front of tower assembly mount also 
  • All steel construction 12″ wide beam construction, no aluminum also
  • Hole 1/0 ground lugs (2 Ea) also
  • Forklift tubes under rear also
  • Auto leveling skid system (4 Ea)also
  • Telescopic crane style outriggers (4 Ea) also
  • Heavy-duty outrigger safety chains (4 Ea) also
  • Adjustable safety locking outrigger 7,000Lb jacks, with locks (4 Ea) also
  • Galvanized steel 2 x 2 jack shoe plates (4 Ea) also
  • Slide outrigger package with roller bearings also
  • Bubble type trailer level guides (4 Ea) also
  • All-weather padlocks and hide-a-key 
  • 36” Steel locking toolbox 
  • MIL-STD 209K Trailer tie-down and lifting lugs 
  • D-Rings front and rear for pulling a skid 
  • Green rod attach points (4 Ea)
  • Built-in deck ground rod storage compartment 
  • Overseas shipment units are completely spray-coated, option 

Additional Features 

  • Equipped with lifting hooks in all four corners also
  • Comprehensive operations manual 
  • Best warranty in the industry and  Lifetime Warranty also
  • 24-hour support
  • High wind all-terrain off-road applications
  • Can be pulled with bulldozers and deployed
  • Designed to meet most military transport applications
  • Build for rough inaccessible terrain applications 
  • Meets the rigor demand of all military environmental also 

LMS 85 SM Weights and dimensions 

  • 10,200 Lb Shipping weight 
  • 6,800 Lb Empty skid 
  • 32′ 10″ Long 
  • 7′ 6″ Wide 
  • 27′ Retracted height 
  • 45′ X 20′ Deployed footprint 
  • 19′ Retracted max. height 
  • Fits in 20′ container


Lifetime Warranty as described on website Https://landamobilesystems.com/company/lms-warranty

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).