pagelmslogobanner

COMMAND CENTERS

LMS manufactures Command Centers to your specification  

Configurations are unlimited with a quick turn.  Sample drawings showing mobile on trailer units.  4′ and 6″ walls are available with fireproof configuration and fire suppression protection installed with alarms for fire and CO2. ATS switch, complete lighting and plugs, the two-door unit as shown. Skid-mounted for easy transport as stationary or transportable on trailer and tower trailer combination.  All units are equipped to be helicopter lifted in if needed. The standard wind rating on this shelter is approx. 120 mph.  There are a couple of wall and ceiling stiffeners that can be installed that will raise that up considerable to 150+ mph.

LMS Shelters meet or exceed applicable NSF, UL 723, Flame Spread -25 in accordance with ASTME-84

  • Power configurations are unlimited we build to suit worldwide deployments.

8X8-COMMAND-CENTER 8X10-SHELTER 8X12-COMMAND-CENTER 8X16-COMMAND-CENTERS

Certified engineered designs for all 50 States, and deployed worldwide with any power configuration.   Often Shelters can be assembled and flown into remote sites as well when access is restricted.  Our units have walls up to 6″ and are deployed in Arctic weather camps both North and South pole regions.   Metal hot-dipped galvanized then coated with a coating that will not chip or peel.  Any color you require various types of siding, including white finish, sand finish, stone aggregate ETC.  Any size HVAC, Power Panels, Auto Transfer Switches, Cable trays, Entry Ports, Power meter set.

These units are solar equipped for operations with little generator usage. 

 LMS65-150'-tower--8x8-SHELTER            LMS85 & 8x12-Shelter         85'-WITH-16'-SHELTER-WEB

Landa Mobile Systems Federal, State, Canadian Code Compliance

  • LMS MANUFACTURES “ANY SIZE SHELTER TO YOUR SPECIFICATIONS”  TIMELY DELIVERY AND SERVICE.
  • REQUIREMENTS. STAMPED ENGINEERING FOR ALL 50 STATES
  • CAN BE FLOWN INTO SITE AND ASSEMBLED
  • YOU CAN ASSEMBLE ON SITE
  • WE CAN FACTORY ASSEMBLE PRIOR TO SHIPMENT
  • WE HAVE MANY TYPES OF SIDING INCLUDING COLORS,  SAND,  STONE AGGREGATE ETC
  • ANY SIZE OF HVAC
  • POWER PANELS
  • GENERATORS ALL SIZES TRANSFER SWITCHES ETC
  • OUR ASSEMBLY TIME IS GUARANTEED
  • MOUNTED ON SKIDS
  • MOUNTED ON TRAILERS
  • MOUNTED ON TOWER COMBO UNITS
  • MOUNTED ON TRAILERS AS COMMAND CENTERS

SHELTER BUILD QUESTIONNAIRE  BARD HVAC SPECSCLICK TO VIEW   MARVAIR HVAC SPECSCLICK TO VIEW

 

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters in the Americas, thanks to team efforts and most important our customers support. “Service-disabled veteran-owned company built in America by Americans.” Minority owner and plant located in the HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.