pagelmslogobanner

SHELTER GENERATOR COMBO UNITS

 

LMS manufactures any size shelter to your specification, 8′ x 20′ x 8.5′ Generator combo unit starting at 35,000k with fire proof configuration and fire suppression protection installed with alarms for fire and CO2. ATS switch, complete lighting and plugs, two door unit as shown. Skid mounted for easy transport and placement. LMS Shelters meet or exceed applicable NSF, UL 723, Flame Spread -25 in accordance with ASTME-84

Our shelters are designed and engineered for all 50 States and Canada. Many shelters can be assembled and flown into remote sites with our skid mounts.  Metal hot dipped galvanized then coated with a coating that will not chip or peal.  Any color you require various types of siding, including  white finish, sand finish, stone aggregate ETC.  Any size HVAC, Power Panels, Auto Transfer Switches, Cable trays, Entry Ports, Power meter set.

BARD HVAC SPECSCLICK TO VIEW   MARVAIR HVAC SPECSCLICK TO VIEW  FIRE SUPPRESSION SYSTEMCLICK TO VIEW

 

Above build Telco Shelter, white with 2-36″ doors, steel panels, fire rated Interior walls and ceiling. Electrical package for interior, 200a load center, 6-4′ light fixtures, 8 quad recepts and 2 switches Outdoor recept and ground wire-halo ground. Steel skid, 8’x23′ galvanized, Flooring package with 8 sheets of plywood, commercial tile and base board, 1ea Marvair HVAC 36000 BTU AVP 36, 1ea 200 Amp ASCO ATS transfer switch 185A2200F4M, 1ea Waveguide Entry port panel 4 port, cable tray 24′ x18″ aluminum, 1ea equipment monitoring system with alarm, dry contact circuit board, 1ea CO2 monitor and alarm, 1ea emergency lighting, 1 ea fire suppression system installed, exhaust fan with auto louvers-Dayton 15″, 48″ generator access door. Shelter weighs 3100 lb and the skid base weighs 1700 lb, total of 4800 lbs.

Landa Mobile Systems Federal, State, Canadian Code Compliance

  • LMS MANUFACTURES “ANY SIZE SHELTER TO YOUR SPECIFICATIONS”  TIMELY DELIVERY AND SERVICE.
  • REQUIREMENTS. STAMPED ENGINEERING FOR ALL 50 STATES
  • CAN BE FLOWN INTO SITE AND ASSEMBLED
  • YOU CAN ASSEMBLE ON SITE
  • WE CAN FACTORY ASSEMBLE PRIOR TO SHIPMENT
  • WE HAVE MANY TYPES OF SIDING INCLUDING COLORS,  SAND,  STONE AGGREGATE ETC
  • ANY SIZE OF HVAC
  • POWER PANELS
  • GENERATORS ALL SIZES TRANSFER SWITCHES ETC
  • OUR ASSEMBLY TIME IS GUARANTEED
  • MOUNTED ON SKIDS
  • MOUNTED ON TRAILERS
  • MOUNTED ON TOWER COMBO UNITS
  • MOUNTED ON TRAILERS AS COMMAND CENTERS
  • LMS OPTIONS
  • DEPOLYED UNITS

SHELTER BUILD QUESTIONNAIRE

 

 

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.