LMS 178 XHD MOBILE TOWER
Lattice Tower
- 178’ tall with 8ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty also
- Tilt base assembly integrated into the trailer. Lifetime Warranty also
- 3 sector antenna mount, custom mount designs also available
- 5’ starr mount for large microwave dish placement with a torque arm, optional Lifetime Warranty. also
- Tower and tilt assembly painted finish for all-weather also
- 1500:1 and 446:1 adjustable worm drive motor ls
- Hydraulic tilt has a manual backup hand pump
- Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly. also
- 90 second minute from horizontal to vertical with 2,000LB so
- 110VAC 60HZ or optional 240VAC 50HZ
- 10 ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″ and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit
- Outrigger stabilizer kit
Tower Safety Features
- The backup emergency key operation also
- 3 ea. heavy duty upper and lower limit switches. also
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. illuminated function lamps for tilting and telescopic.
- 1 ea. red keyed power disconnect for all function controls
- Theft proof cable storage reel with grease nipple. Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding also
- All steel construction 10″ wide beam construction, no aluminum also
- 11 hold adjustable hitch coupler channel. Lifetime Warranty also
- Removable 2 5/16″ ball hitch and pintle included. also
- 7 blade type connectors also
- 12,000LB side pull spring-loaded tongue jack also also
- Two-hole 1/0 ground lugs (2 Ea) also
- Heavy-duty safety chains (2 Ea) also
- Tube ground rod attach points welded to outriggers (4 Ea) also
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
- Slide outriggers with needle bearing for easy pull-out. (6 Ea) also
- Tamper-proof locking outrigger jacks. (6 Ea) also
- Bubble type trailer level guides (6 Ea)
- 7,000Lb axles each electric brake (3 Ea) also
- Torsion axle independent suspensions
- 7 ea 16 ply 215-75-17.5 radial tires also
- 7 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
- Mudflaps
- 12 position guy kit
- Unguided footprint same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue. Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hide-a-key
- 6 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape. also
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. flat steel welded to rail. Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for helicopter lift also
- Removable tongue for transport and anti-theft. also
- Comprehensive operations manual
- Best warranty in the industry and Lifetime Warranty also
- 24 hour support also
- High wind all terrain off-road applications
- Can be pulled with standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety also
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers also
- Generators also
- Fuel tanks also
- Fuel pumps also
- The lightning protection kit also
LMS 178 XHD Weights and Dimensions
- TBD Lbs shipping weight
- TBD Lbs Useful load
- 24,000 GVWR
- 46′ Long
- 10’ 4″ Tall
- 8′ 6″ Wide
- 37′.5″ X 18′ Deployed footprint / outriggers extended
LMS 178 XHD PRODUCT DESCRIPTION
Lifetime Warranty as described on website Https://landamobilesystems.com/company/lms-warranty
Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber, and plastics).
Certified Green Gin Poles are manufactured 100% from USA recycled steel.
Certified SDVOSB | Minority owned company | HUB Zone Certified