Lattice Tower

  • 112’ tall with 4ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
  • Tilt base assembly integrated into the trailer. Lifetime Warranty
  • 3 sector antenna mount, custom mount designs also available
  • 5’ starr mount for large microwave dish placement with torque arm Lifetime Warranty
  • 2 ea torsion rods. Lifetime Warranty.
  • 16 ea ½” x 4” stiffener plates Lifetime Warranty
  • Tower and tilt assembly painted finish for all-weather
  • 900:1 and 446:1 adjustable worm drive motor
  • Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
  • Hydraulic tilt has a manual backup hand pump
  • Tower elevated by 2.5HP, wash down-rated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly
  • 1 minute from horizontal to vertical with 2,000LB customer’s head load.
  • 11 minutes to full tower erection with single-stage process
  • 22 minutes with the dual-stage process
  • 110VAC 60HZ or optional 240VAC 50HZ
  • 5 ea. cable guide rings Lifetime Warranty
  • Patented derlin mast guide blocks
  • Galvanized heavy-duty lifting and pull-down drums
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
  • Cables certified 14,000LB break strength.
  • All cables have been marinated in LPS3 for anti-corrosion
  • 4″, 5″ and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
  • All Eco-Guard (TM) eco coated grade 9 bolts
  • All units are designed to withstand-120/ 160 degrees Fahrenheit

Tower Safety Features

  • The backup emergency key operation
  • 3 ea. heavy duty upper and lower limit switches
  • Weatherproof (locking) control panel with ingress protection IP65
  • 2 ea. switches for total deployment control
  • 2 ea. illuminated function lamps for tilting and telescopic.
  • 1 ea. red keyed power disconnect for all function controls
  • Theft proof cable storage reel with grease nipple. Lifetime Warranty
  • Galvanized safety end caps covering rotatable components
  • 25′ full operation remote control cable option

Tower Trailer

  • Structural outriggers. Lifetime Warranty
  • Diamond plate, 11 gauge deck
  • Electrical components bonded tor frame for system grounding
  • All steel construction 10″ wide beam construction, no aluminum
  • 11 hold adjustable hitch coupler channel. Lifetime Warranty
  • Removable 2 5/16″ ball hitch and pintle included
  • 7 blade type connectors
  • 12,000LB side pull spring-loaded tongue jack
  • Two-hole 1/0 ground lugs (2 Ea)
  • Heavy-duty safety chains (2 Ea)
  • Tube ground rod attach points welded to outriggers (4 Ea)
  • Ground rod storage tube built-in trailer deck, green cap (1Ea)
  • Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
  • Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
  • Slide outriggers with needle bearing for easy pull-out. (6 Ea)
  • Tamper-proof locking outrigger jacks. (6 Ea)
  • Bubble type trailer level guides (6 Ea)
  • 8,000Lb axles each electric brake (3 Ea)
  • Torsion axle independent suspension
  • 7 ea 16 ply 215-75-17.5 radial tires
  • 7 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
  • Mudflaps
  • 12 position guy kit
  • Unguided footprint same as outrigger footprint

Trailer Safety Features

  • 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
  • Anti-theft removable tongue. Lifetime Warranty
  • Emergency trailer break-away device
  • Full-size spare under deck
  • All-weather padlocks and hide-a-key
  • 6 sets wheel loose nut indicators
  • 1 ea trailer step-up, with 1 ea step handrail
  • Flashing emergency lights
  • DOT and transport Canada LED lighting package and reflective tape
  • 36” steel locking aluminum powder coated black diamond plate toolbox secured
  • Decks water-fall sides add 400% to strength Vs. flat steel welded to rail. Lifetime Warranty

Additional Features 

  • Equipped with lifting hooks in all four corners for a helicopter lift 
  • Removable tongue for transport and anti-theft
  • Comprehensive operations manual
  • Best warranty in the industry and Lifetime Warranty
  • 24-hour support
  • High wind all-terrain off-road applications
  • Can be pulled with standard 3/4 ton truck
  • Build for rough inaccessible terrain applications
  • Engineered and designed to meet the rigor demand of all military environmental
  • Lock-out kit for climber safety
  • Safety climb, for climber safety
  • Lighting protection
  • FAA Lighting
  • Extra reels
  • lide-out
  • Safety rails
  • Pan adapter
  • Starr mount
  • Grounding kit
  • Tower covers
  • Generators
  • Fuel tanks
  • Fuel pumps
  • Lighting protection kit
  • Hydraulic tilt backup hand pump


  • TBD Shipping weight
  • TBD Lbs empty trailer
  • 24,000 Lbs GVWR
  • TBD Lbs trailer useful load
  • 32′.5″ Long total unit
  • 7′ 2″ Tall, horizontal nesting
  • 7′ 7″ Wide trailer
  • 36′ Tower retracted minimum height
  • 2000 Lbs tilt head-load
  • 2000 Lbs head load
  • 30′ Deck 


Lifetime Warranty as described on website Https://landamobilesystems.com/company/lms-warranty

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber, and plastics).

Certified Green Gin Poles are manufactured 100% from USA recycled steel.

Certified SDVOSB | Minority owned company | HUB Zone Certified

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers, and Portable Shelters in the Americas, thanks to team efforts and most important our customer support. “Service-disabled veteran-owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance with affirmative action obligations on behalf of minorities, women, protected veterans, and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.