
LMS 150 XHD MOBILE TOWER
Lattice Tower
- 150’ tall with 6ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
- Tilt base assembly integrated into the trailer. Lifetime Warranty
- 3 sector antenna mount, custom mount designs also available
- 5’ starr mount for large microwave dish placement with a torque arm, Optional item Lifetime Warranty.
- 16 ea ½” x 4” stiffener plates Lifetime Warranty.
- 900:1 and 446:1 adjustable worm drive motor
- Tilted to vertical by 2 ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
- Hydraulic tilt has a manual backup hand pump
- Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor, and hydraulic gearbox assembly.
- 1 minute from horizontal to vertical with 2,000LB customer’s head load
- 22 minutes with the dual-stage process
- 110VAC 60HZ or optional 240VAC 50HZ
- 7 ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″, and 6″ galvanized plated steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit
Tower Safety Features
- The backup emergency key operation
- 3 ea. heavy duty upper and lower limit switches
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. illuminated function lamps for tilting and telescopic
- 1 ea. red keyed power disconnect for all function controls
- Theft proof cable storage reel with grease nipple. Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding
- All steel construction 10″ wide beam construction, no aluminum
- 11 hold adjustable hitch coupler channel. Lifetime Warranty
- Removable 2 5/16″ ball hitch and pintle included
- 7 blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
- Slide outriggers with needle bearing for easy pull-out. (6 Ea)
- Tamper-proof locking outrigger jacks. (6 Ea)
- Bubble type trailer level guides (6 Ea)
- 7,000Lb axles each electric brake (3 Ea)
- Torsion axle independent suspension also
- 7 ea 16 plies 215-75-17.5 radial tires
- 7 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
- Mudflaps
- 12 position guy kit, option for many more
- Unguided footprint same as outrigger footprint
- Outriggers with lockouts and safety chains on all to prevent a slide-out in transport
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue. Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hide-a-key
- 6 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape.
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. Flat steel welded to rail. Lifetime Warranty
- 6 ea telescoping outriggers with safety chains and lockdown handles preventing unauthorized adjustments Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft
- Comprehensive operations manual
- Best warranty in the industry and Lifetime Warranty
- 24-hour support
- High wind all-terrain off-road applications
- It can be pulled with a standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks, under deck or above, the deck
- Fuel pump
- Lighting protection kit
- Hydraulic tilt backup hand pump
- New outrigger stabilized kits for all towers 106′ through 250′ giving much more high wind resistance.
LMS 150 XHD Weights and Dimensions
- 13,480 Lbs shipping weight
- 46′ Long
- 10’ 4″ Tall
- 8′ 6″ Wide
- 37′.5″ X 18′ Deployed footprint / outriggers extended
- 7520 Lbs Useful load
- 21,000 GVWR
LMS 150 XHD PRODUCT DESCRIPTION