pagelmslogobanner

LMS 106 HW MOBILE TOWER

 

LMS 106 HW

  • 106’ MODEL (TOWER ASSEMBLY WT. 3800 LBS)  Lifetime Warranty
  • TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY SUPPORTS OUR COMPLETE LINE OF LATTICE TOWERS Lifetime Warranty
  • 3 SECTOR PIVOT-ABLE ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • 6 EA-21’ MULTIPLE SECTIONS
  • WEATHERPROOF (LOCKING) CONTROL PANEL, LIMIT SWITCHES FOR TILT AND EXTENSION OPERATION
  • 900:1 WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT UP TO 106’ 
  • TOWER EXTENDABLE WITH STARR MOUNT TO 111′
  • BACKUP POWERLESS KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL
  • THEFT PROOF CABLE STORAGE REEL, OPTIONAL ELECTRIC, MULTIPLE REELS, SPLIT REELS AND HANDLES AVAIL.
  • 10 EA CABLE GUIDE RINGS
  • 4″ AND 6″ STEEL CUSTOM BEARING FITTED LANDA PULLEYS
  • ALL ECO COATED GRADE 9 BOLTS  
  • 9000 LB PULL DOWN WINCH ENABLING 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH LOAD
  • 9 POSITION GUY KIT
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • HIGH STRENGTH 7-19 GALVANIZED AIRCRAFT QUALITY LIFTING CABLES MARINATED IN LPS3
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • 850LB TILT PAYLOAD CERTIFIED, 120 MPH WIND, EACH INSTALL IS DIFFERENT
  • VERTICAL LIFT ABILITY TESTED TO 2900 LBS WE RATE THEM AT 1800 LBS STATIC LOAD
  • SELF SUPPORTING UN-GUYED AT 106′ TO 95 MPH WIND
  • MINIMUM ELEVATION 24′
  • REDUNDANT TOWER RETRACTION CABLES

MOTOR DRIVE UNITS  Main drive motor is wash-down direct drive worm gear extreme environment w/moisture drain.  All units are designed to withstand the most severe  -120 / 160 degrees Fahrenheit conditions without failure. Safety guards in place on all rotatable components for operator protection.

LMS NEVER FAIL KEY SYSTEM INCLUDED Patent Pending LMS key system have a Lifetime Warranty LMS units are EMP secure with both tilt and erection systems backed up and designed to be operated by hand with LMS Key system and a cordless in case of a remote no power. The Lattice Towers are 100% Redundant backed up as a true emergency unit in the field, and you will not be let down when its critical.

Each tower has been tested with 900 pounds head load prior to factory delivery.

LMS OPTIONS

DEPOLYED UNITS

TOWER TRAILER

  • DIAMOND PLATE 11 GAUGE DECK 22′ LONG X ’ 6” WIDE  Lifetime Warranty
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH Lifetime Warranty
  • TRAILER WEIGHT BEFORE BASE AND TOWER, 4920 LBS
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • INTEGRATED TOWER BASE TILT SYSTEM CONSTRUCTED WITH 4” X 4” X 1/4” STRUCTURAL TUBING FOR EXTRA STRENGTH  Lifetime Warranty
  • 11’ X 8’ OPEN DECK SPACE IN FRONT OF TOWER ASSEMBLY MOUNT
  • ALL STEEL CONSTRUCTION 10” WIDE BEAM CONSTRUCTION, NO ALUMINUM Lifetime Warranty
  • 6 HOLE ADJUSTABLE COUPLER CHANNEL W/REMOVABLE 2 5/16″ BALL HITCH, OPT/PINTLE, GOOSE-NECK / FIFTH WHEEL
  • 7 PIN RV-TYPE SOLID RUBBER CONNECTOR LINE
  • 10,000LB SIDE PULL SPRING LOADED TONGUE JACK
  • EMERGENCY TRAILER BREAKAWAY DEVICE
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • 2 EA HEAVY DUTY SAFETY CHAINS
  • 4 EA TELESCOPIC CRANE STYLE OUTRIGGERS WITH 4EA ADJUSTABLE 7,000LB JACKS
  • 4 EA EASY SLIDE OUTRIGGER PACKAGE WITH ROLLER BEARINGS
  • 4 EA OUTRIGGER SAFETY CHAINS
  • 4 EA OUTRIGGER LOCKING JACKS FOR ADDED FIELD SAFETY
  • 4 EA GALVANIZED JACK SAFETY SHOES
  • 4 EA MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • 1 EA MIL-STD 209K NOSE GUY ANCHOR POINT
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • FULL SYSTEM GROUNDED TO DECK
  • 2 EA 7,000LB AXLES EACH ELECTRIC BRAKES
  • 3 EA FLIPPER-SPRING EQUALIZER-SUSPENSION
  • 5 EA 16 PLY 215-75-17.5 RADIAL TIRES
  • 5 EA17.50 SOLID STEEL WHEELS  Lifetime Warranty
  • 4 SETS WHEEL SETS LOOSE NUT INDICATORS
  • 1/4 ” LINE X SPRAYED ON FULL DECK AND FRONT OF TRAILER FOR ANTI SLIP
  • 1 EA BUILD IN GROUND RODS AND STORAGE  Lifetime Warranty
  • METAL SURFACES ARE COMPLETELY SPRAYED COATED WITH PROTECTIVE REMOVABLE COATING.
  • DEPLOYED OUTRIGGERS FOOTPRINT 20′ X 40’ WHEN FULLY DEPLOYED  Lifetime Warranty
  • 4 EA BUBBLE TYPE TRAILER LEVEL GUIDES
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • DOT AND TRANSPORT CANADA LED LIGHTING PACKAGE AND REFLECTIVE TAPE
  • 36” STEEL LOCKING TOOL BOX
  • FLASHING EMERGENCY LIGHTS

TOWER TRAILER Structural Outrigger and Tower tilt assembly have a Lifetime Warranty, not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics

LMS 106 HW WEIGHTS AND DIMENSIONS

  • 10,700 LBS SHIPPING WEIGHT
  • 30’ 5” LONG
  • 10’ 4″ TALL
  • 8′ 2″   WIDE
  • 3,300 LBS USEFUL LOAD, optional triple axle or buds for increased load
  • 14,000 GVWR
  •  10’9” x 8’ x 4’2” OPEN DECK SPACE

 

  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • CAN BE PULLED WITH STANDARD 3/4 TON PICKUP TRUCK FOR OFF ROAD 4X4 RECOMMENDED
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT FOR REMOTE
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  • CAN BE PULLED IN WITH BULLDOZERS, AND DEPLOYED MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • SELF SUPPORTING  UNGUYED AT 106′ TO 95 MPH WIND. MINIMUM ELEVATION 24′ 
  • 24 HOUR SUPPORT
  • UNITS ARE COMPLETELY SPRAYED COATED WITH PROTECTIVE REMOVABLE COATING.

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

LMS 106HW PRODUCT DESCRIPTION 2018-Good

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large