pagelmslogobanner

LMS 120 XHD MOBILE TOWER PATENTED “EXTRA HEAVY DUTY”

LMS 120 XHD

  • 5 Ea 31′ SECTIONS 2″ SCHEDULE 40 Lifetime Warranty
  • 46″ TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY SUPPORTS OUR COMPLETE LINE OF LATTICE TOWERS.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT. CUSTOM DESIGNS AVAILABLE 
  • DUAL TORSION ROD DESIGN WITH STIFFENER PLATES Lifetime Warranty
  • HOT DIPPED GALVANIZED FINISH EN ISO 1461 / ASTM A123
  • 2 EA SWITCHES FOR FULL OPERATIONAL CONTROL
  • 900:1 WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT UP TO 120’
  • BACKUP POWERLESS KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL THEFT PROFF CABLE STORAGE REEL,OPTIONAL ELECTRIC, MULTIPLE REELS, SPLIT REELS AND HANDLES
  • 6 EA CABLE GUIDE RINGS FULL LENGTH OF TOWER
  • WEATHERPROOF (LOCKING) CONTROL PANEL INTEGRATING
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH LOAD
  • 22 MINUTES TO FULL ERECTION
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES, 110VAC 60HZ/ OPTIONAL 240VAC 50 HZ
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • VERTICAL LIFT ABILITY TESTED TO 2000LBS
  • HIGH STRENGTH AIRCRAFT QUALITY LIFTING CABLES MARINATED IN LPS3
  • REDUNDANT TOWER RETRACTION CABLE SYSTEM
  • 4″ AND 6″ STEEL CUSTOM PULLEYS FITTED WITH BEARINGS
  • ALL ECO COATED GRADE 9 BOLTS
  • MOTOR DRIVE UNITS: MAIN MOTOR IS WASH DOWN DIRECT DRIVE WORM FEAR EXTREME ENVIRONMENT W/ MOISTURE DRAIN
  • ALL UNITS ARE DEIGNED TO WITHSTAND THE MOST SEVERE -120/ 160 DEGREES FAHRENHEIT CONDITIONS WITHOUT FAILURE 
  • STEEL SAFETY GUARDS IN PLACE ON ALL ROTATABLE COMPONENTS FOR OPERATOR PROTECTION

LMS OPTIONS

DEPOLYED UNITS

 

LMS 120 XHD TRAILER “PATENT PENDING

  • TOWER TRAILER: STRUCTURAL OUTRIGGER AND TOWER TILT ASSEMBLY HAVE Lifetime Warranty (not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics)
  • TRIPLE AXLE
  • DIAMOND PLATE 11 GAUGE DECK, 30′ LONG X 7′ 6″ WIDE
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS. FLAT STEEL WELDED TO RAIL
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • 1/4″ LINE X SPRAYED DECK FOR ANTI-SLIP
  • ANTI-THEFT REMOVABLE TONGUE
  • INTEGRATED TOWER BASE TILT SYSTEM CONSTRUCTED WITH 4″ X 4″ X 1/4″ STRUCTURAL TUBING FOR EXTRA STRENGTH
  • ALL STEEL CONSTRUCTION, NO ALUMINUM
  • 6 HOLE ADJUSTABLE COUPLER CHANNEL W/ REMOVABLE 2 5/16″ BALL HITCH AND PINTLE INCLUDED, OPT. GOOSENECK OR FIFTH WHEEL
  • 7 PIN RV-TYPE CONNECTOR
  • 10,000LB SIDE PULL SPRING LOADED TONGUE JACK
  • BUILT IN GROUND ROD STORAGE
  • D RING ON NOSE OF TRAILER FOR GUYING
  • EMERGENCY TRAILER BREAKAWAY DEVICE
  • 2 Ea TWO HOLE 1/0 GROUND LUGS
  • 2 Ea HEAVY DUTY TOW SAFETY CHAINS
  • 4 Ea GROUND ROD WELDED ATTACH POINTS
  • 6 Ea TELESCOPIC CRANE STYLE OUTRIGGERS Lifetime Warranty
  • 6 Ea ADJUSTABLE 10,000LB LOCKING JACKS W/PADLOCKS PROVIDED FOOTPRINT 20′ X 40′ WHEN FULLY DEPLOYED
  • 6 Ea GALVANIZED 2′ X 2′ OUTRIGGER JACK PADS
  • 6 EA SLIDE OUTRIGGER PACKAGES WITH ROLLER BEARINGS
  • 6 Ea SAFETY CHAINS FOR OUTRIGGERS
  • 1 EA 12,000LB LIFTING JACK FOR PINTLE OF STANDARD HITCH TRAILER
  • 6 Ea BUBBLE TYPE TRAILER LEVELS3 Ea 8,000LB AXLES EACH ELECTRIC BRAKES
  • 3 Ea 8,000LB AXLES EACH ELECTRIC BRAKES
  • TORSION AXLE INDEPENDENT SUSPENSION 24,000GVWR
  • FULL SIZE SPARE MOUNTED UNDER DECK
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 7 Ea 16 PLY 16 RADIAL TIRES AND WHEELS
  • 7 Ea 17.50 POWDER COATED SOLID STEEL WHEELS
  • 7 Ea WHEEL SETS LOOSE NUT INDICATORS
  • 1 EA TRAILER STEP-UP AND HAND RAIL
  • DOT AND TRANSPORT CANADA LED LIGHTING PACKAGE AND REFLECTIVE TAPE
  • 36′ STEEL LOCKING ALUMINUM POWDER COATED BLACK DIAMOND PLATE TOOL BOX
  • FLASHING EMERGENCY LIGHTS
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAGE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • 12 POSITION GUY KIT, GUYING TO BE DETERMINED BY INDEPENDENT ENGINEER
  • NO ANCHOR RODS OR JERSEY BARRIER INCLUDED
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • 24 HOUR SUPPORT
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • CAN BE PULLED WITH STANDARD 3/4 TON PICKUP, TRUCK FOR OFF ROAD 4X4 RECOMMENDED
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS AND HELICOPTER LIFT
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED WITH PROTECTIVE REMOVABLE COATING.

LMS 120 XHD WEIGHTS AND DIMENSIONS

  • 14,780  LBS SHIPPING WEIGHT
  • 45’ 5” LONG
  • 10’ 4″ TALL
  • 8′ 3″ WIDE
  • 23′ X 8′ OPEN DECK SPACE IN FRONT OF TILT BASE
  • 37′.5″ X 18′ DEPLOYED FOOTPRINT/ OUTRIGGERS EXTENDED
  • 9,220  LBS USEFUL LOAD
  • 24,000 GVWR

PAINT OPTIONS/ CHOICE OF COLOR ETC

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.
  3. MANY PAINT OPTIONS, YOUR CALL.
  4. FAA LIGHTING
  5. EXTRA REELS
  6. SLIDE OUT
  7. SAFETY RAILS
  8. PAN ADAPTER
  9. STARR MOUNT
  10. GROUNDING KIT
  11. TOWER COVERS
  12. MOTOR COVERS
  13. GENERATORS
  14. FUEL TANKS
  15. FUEL PUMPS
  16. LIGHTNING KITS

LMS 120 XHD PRODUCT DESCRIPTION 2018

MOTOR DRIVE UNITS  Main drive motor is wash-down direct drive worm gear extreme environment w/moisture drain.  All units are designed to withstand the most severe  -120 / 160 degrees Fahrenheit conditions without failure. Safety guards in place on all rotatable components for operator protection.

TOWER TRAILER Structural Outrigger and Tower tilt assembly have a Lifetime Warranty, not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).

LMS NEVER FAIL KEY SYSTEM INCLUDED Patent Pending LMS key system has a Lifetime Warranty.  LMS units are EMP secure with both tilt and erection systems backed up and designed to be operated by hand with LMS Key system and a cordless in case of a remote no power. The Lattice Towers are 100% Redundant backed up as a true emergency unit in the field, and you will not be let down when its critical.

Each tower has been tested with 950 pounds tilt head load prior to factory delivery. 

LMS towers utilize 2 3/8” OD ASTM A500-07, A53-12 grade B, Carbon steel schedule 40 steel pipe, 55.3 KSI yield strength in constructing the complete tower assembly.  Solid rod cross bracing with back filled welds are utilized on the complete tower. “Not machine applied” like others. Our larger towers incorporate multiple Torsion Rods and Stiffener Plates for added strength. The main body of the tower has been analyzed utilizing the commercially available software TNX Tower version 0.0.8 (previously known as RISA Tower & ERI Tower).  Full operational and Cad animated erection and 3D print available with equipment placement models.

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS.

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

image006  Nate-logo-large