
LMS 120 CR CONTAINER READY MOBILE TOWER
Lattice Tower
- 120’ tall with 5 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty also
- Tilt base assembly integrated into the trailer. Lifetime Warranty
- 3 sector antenna mount, custom mount designs also available
- 5’ starr mount for large microwave dish placement with a torque arm, optional Lifetime Warranty.
- 2 ea torsion rods. Lifetime Warranty.
- 16 ea ½” x 4” stiffener plates Lifetime Warranty.
- Tower and tilt assembly painted finish for all-weather
- 900:1 and 446:1 adjustable worm drive motor
- Tilted to vertical by 2 ea 3″ heavy-duty hydraulic cylinders. Lifetime Warranty
- Hydraulic tilt has a manual backup hand pump
- Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor and hydraulic gearbox assembly.
- 1 minute from horizontal to vertical with 2,000LB customer’s head load.
- 11 minutes to full tower erection with single-stage process
- 22 minutes with the dual-stage process
- 110VAC 60HZ or optional 240VAC 50HZ
- 6 ea. cable guide rings Lifetime Warranty
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
- Cables certified 14,000LB break strength.
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″ and 6″ galvanized steel smart custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco coated grade 9 bolts
- All units are designed to withstand-120/ 160 degrees Fahrenheit
Tower Safety Features
- The backup emergency key operation also
- 3 ea. Heavy duty upper and lower limit switches.
- Weatherproof (locking) control panel with ingress protection IP65
- 2 ea. switches for total deployment control
- 2 ea. Illuminated function lamps for tilting and telescopic.
- 1 ea. red keyed power disconnect for all function controls
- Theft proof cable storage reel with grease nipple. Lifetime Warranty
- Galvanized safety end caps covering rotatable components
- 25′ full operation remote control cable option
Tower Trailer
- Structural outriggers. Lifetime Warranty
- Diamond plate, 11 gauge deck
- Electrical components bonded tor frame for system grounding
- All steel construction 10″ wide beam construction, no aluminum
- 11 hold adjustable hitch coupler channel. Lifetime Warranty
- Removable 2 5/16″ ball hitch and pintle included.
- 7 blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea) also
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (6 Ea)
- Galvanized 2′ x 2′ outrigger jack pads (6 Ea)
- Slide outriggers with needle bearing for easy pull-out. (6 Ea)
- Tamper-proof locking outrigger jacks. (6 Ea)
- Bubble type trailer level guides (6 Ea)
- 8,000Lb axles each electric brake (3 Ea)
- Torsion axle independent suspensions
- 7 ea 16 plies 215-75-17.5 radial tires
- 7 ea 17.50 powder-coated solid steel wheels. Lifetime Warranty
- Mudflaps
- 12 position guy kit
- Unguided footprint the same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip.
- Anti-theft removable tongue. Lifetime Warranty
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hide-a-key
- 6 sets wheel loose nut indicators
- 1 ea trailer step-up, with 1 ea step handrail
- Flashing emergency lights
- DOT and transport Canada LED lighting package and reflective tape.
- 36” locking aluminum powder coated black diamond plate toolbox secured
- Decks water-fall sides add 400% to strength Vs. Flat steel welded to rail. Lifetime Warranty
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft.
- Comprehensive operations manual
- Best warranty in the industry and Lifetime Warranty
- 24-hour support
- High wind all-terrain off-road applications
- It can be pulled with a standard 3/4 ton truck
- Build for rough inaccessible terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 120 CR WEIGHTS AND DIMENSION
- It fits in a 40′ container 1
- 15940 Lbs shipping weigh
- 24000 Lbs GVWR
- 8060 Lbs trailer useful load
- 39′ 3″ Long, total unit
- 7′ 2″ Tall, horizontal nesting
- 7′ 7″ Wide trailer
- LMS 120 CR PRODUCT DESCRIPTION