LMS 65 CR CONTAINER READY PORTABLE TOWER

LMS 65 CR

LMS= Landa Mobile Systems
CR = Container Ready
65 = height in feet

  • 65’ MODEL 
  • 4 EA-21’ SECTIONS, Lifetime Warranty
  • ALL SECTIONS ASTM A500-07, A53-12, GRADE B, CARBON STEEL, SCHEDULE 40 STRUCTURAL TUBING  Lifetime Warranty
  • TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY SUPPORTS OUR COMPLETE LINE OF LATTICE TOWERS.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • DUAL TORSION ROD DESIGN WITH MULTIPLE STIFFENER PLATES 
  • HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER, LIMIT SWITCHES FOR TILT AND EXTENSION
  • 900:1 WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT 
  • BACKUP POWERLESS KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL
  • THEFT PROOF CABLE STORAGE REEL, OPTIONAL ELECTRIC, MULTIPLE REELS, SPLIT REELS AND HANDLES
  • 5 EA CABLE GUIDE RINGS
  • WEATHERPROOF (LOCKING) CONTROL PANEL
  • 2 EA SWITCHES FOR TOTAL DEPLOYMENT CONTROLS 
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH LOAD
  • 45 MIN TO FULL ERECTION
  • HYDRAULIC SYSTEMS TILTING WITH 1000 Lb HEAD LOAD
  • 2000LB TILT PAY LOAD
  • 2500Lb PAYLOAD CERTIFIED
  • 2900Lb VERTICAL LIFT ABILITY
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • REDUNDANT TOWER RETRACTION CABLES MARINATED IN LPS3
  • 4″, 5″AND 6″ STEEL CUSTOM BEARING FITTED LANDA PULLEYS  
  • HIGH STRENGTH AIRCRAFT QUALITY LIFTING CABLES MARINATED IN LPS3
  • TOWER BUILT ALL ECO COATED GRADE 9 BOLTS  
  • MOTOR DRIVE UNITS  Main drive motor is wash-down direct drive worm gear extreme environment w/moisture drain.  All units are designed to withstand the most severe  -120 / 160 degrees Fahrenheit conditions without failure.
  • STEEL SAFETY END CAP AND LIFTING DRUM SAFETY COVERS
  • LMS NEVER FAIL KEY SYSTEM INCLUDED Patent Pending LMS key system. LMS units are EMP secure with both tilt and erection systems backed up and designed to be operated by hand with LMS Key system and a cordless in case of a remote no power. The Lattice Towers are 100% Redundant backed up as a true emergency unit in the field, and you will not be let down when its critical. Lifetime Warranty

LMS OPTIONS

DEPOLYED UNITS

TOWER TRAILER

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large