LMS 85 CR CONTAINER READY MOBILE TOWER

FITS IN A 40FT CONTAINER

MODEL LMS 85 CR CONTAINER READY MOBILE TOWER, FITS IN AIRCRAFT AND HELICOPTER TRANSPORTABLE

  • 85’ tall, 5 EA SECTION LEGS ASTM A500-07, A53-12, GRADE B, US CARBON STEEL Lifetime Warranty
  • OPTIONAL HSS ASTM DOM SECTION LEGS Lifetime Warranty
  • TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • 5’ STARR MOUNT FOR LARGE MICROWAVE DISH PLACEMENT OPTIONAL Lifetime Warranty.
  • 2 EA TORSION ROD Lifetime Warranty.
  • 16 EA ½” X 4” STIFFENER PLATES, A500 US STEEL Lifetime Warranty.
  • TOWER HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER
  • 900:1 AND 446:1 ADJUSTABLE WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT
  • CLIMBABLE MAN-RATED TOWER WHEN EQUIPPED WITH OPTIONAL SAFETY CLIMB
  • BACKUP EMP KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL IN CASE OF REMOTE NO POWER. TILTED TO THE VERTICAL POSITION BY 2 EA 4” HEAVY DUTY HYDRAULIC CYLINDERS WITH CHROME -PLATED SOLID 2” SHAFT.
  • TOWER IS AUTOMATICALLY ELEVATED BY 2 ½ HP TOTALLY ENCLOSED FAN COOLED (TEFC), WASH DOWN RATED, DIRECT DRIVE STAINLESS SHAFT WINCH MOTOR AND HYDRAULIC GEARBOX ASSEMBLY WITH NO BELTS OR CHAINS”.
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH 2500 LB CUSTOMERS HEAD LOAD
  • 11 MINUTES FULL TOWER ERECTION SINGLE STAGE PROCESS OFFERS REDUCED LIFT WEIGHT OR 22 MINUTES DUAL STAGE 
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • INGRESS PROTECTION IP65, WEATHERPROOF (LOCKING) CONTROL PANEL
  • 25′ FULL OPERATION REMOTE CONTROL CABLE OPTIONAL
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • 2 EA SWITCHES FOR TOTAL DEPLOYMENT CONTROL
  • 2 EA ILLUMINATED FUNCTION LAMPS FOR TILTING AND TELESCOPIC
  • 1 EA RED KEYED POWER DISCONNECT FOR ALL FUNCTION CONTROLS
  • TILTED TO THE VERTICAL POSITION BY 2 EA 4” HEAVY DUTY HYDRAULIC CYLINDERS WITH CHROME PLATED SOLID 2” SHAFT. 
  • THEFT PROOF CABLE STORAGE REEL WITH GREASE NIPPLE Lifetime Warranty
  • 6 EA CABLE GUIDE RINGS  Lifetime Warranty
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • GALVANIZED HEAVY DUTY LIFTING AND PULL-DOWN DRUMS WITH GALVANIZED SAFETY END CAPS COVERING ROTATABLES PER OSHA.
  • ALL TOWER SECTIONS ARE OPERATED ONLY WITH CERTIFIED 3/8” DIAMETER 7/19 GALVANIZED AIRCRAFT QUALITY CABLES.  ALL CABLES HAS BEEN MARINATED IN LPS3 FOR LONG LIFE ANTI CORROSION FOR HARSH SALT WATER ENVIRONMENTS.  CERTIFIED BREAK STRENGTH OF 14,000lb
  • 4″, 5″AND 6″ GALVANIZED STEEL SMART CUSTOM BEARINGS FITTED PULLEYS ALSO MARINATED IN LPS3
  • ALL ECO-GUARD (TM) ECO COATED GRADE 9 BOLTS HAVING GREATER TENSILE STRENGTH THAN GRADE 8, DESIGNED FOR USE IN HIGH-STRESS AND HIGH STRENGTH APPLICATIONS. COATING THAT MEETS 1000 HRS OF SALT SPRAY CORROSION RESISTANCE FOR A MAXIMUM TENSILE STRENGTH OF TYPICALLY 180,000 PSI
  • MOTOR DRIVE UNITS: MAIN DRIVE MOTOR IS WASH-DOWN DIRECT DRIVE WORM GEAR EXTREME ENVIRONMENT W/MOISTURE DRAIN. OPTIONAL STAINLESS-STEEL MOTOR CASING.
  • ALL UNITS ARE DESIGNED TO WITHSTAND THE MOST SEVERE -120 / 160 DEGREES FAHRENHEIT CONDITIONS
  • GALVANIZED STEEL SAFETY GUARDS IN PLACE ON ALL ROTATABLE COMPONENTS PER “OSHA SAFETY GUARD STANDARDS” ON ALL ROTATABLES AND PROTECTIVE GRATE SCREEN OVER DUAL CABLE ROTATABLE DRUMS, AS WELL AS END SHAFTS. Lifetime Warranty
  • LMS NEVER FAIL KEY SYSTEM INCLUDED. LMS UNITS ARE SECURE WITH BOTH TILT AND ERECTION SYSTEMS. BACKED UP AND DESIGNED TO BE OPERATED BY HAND WITH LMS KEY SYSTEM AND A CORDLESS DRILL IN CASE OF NO POWER. THE LATTICE TOWERS ARE 100% REDUNDANT BACK-UP. Lifetime Warranty
  • LMS OPTIONS

  • DEPLOYED UNITS

TOWER TRAILER

  • STRUCTURAL OUTRIGGERS Lifetime Warranty
  • DIAMOND PLATE 11 GAUGE DECK
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS. FLAT STEEL WELDED TO RAIL Lifetime Warranty
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • ALL STEEL CONSTRUCTION 10” WIDE BEAM CONSTRUCTION, NO ALUMINUM
  • 1/4” LINE X SPRAYED ON FULL DECK AND FRONT OF TRAILER FOR ANTI SLIP
  • ANTI THEFT REMOVABLE TONGUE  Lifetime Warranty
  • 11 HOLE ADJUSTABLE HITCH COUPLER CHANNEL  Lifetime Warranty
  • REMOVABLE 2 5/16″ BALL HITCH AND PINTLE INCLUDED
  • 7 BLADE TYPE CONNECTORS
  • 12,000 LB SIDE PULL SPRING LOADED TONGUE JACK
  • EMERGENCY TRAILER BREAKAWAY DEVICE
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • 2 EA HEAVY DUTY SAFETY CHAINS
  • 4 EA TUBE GROUND ROD ATTACH POINT HOLDERS WELDED TO OUTRIGGERS
  • 1 EA GROUND ROD STORAGE TUBE BUILT IN TRAILER DECK, GREEN CAP
  • 4 EA ADJUSTABLE 12,000 LB LOCKING JACKS W/ PADLOCK PROVIDED
  • 4 EA GALVANIZED 2′ X 2′ OUTRIGGER JACK PADS
  • 4 EA SLIDE OUTRIGGERS WITH NEEDLE BEARING FOR EASY PULL-OUT
  • 4 EA TAMPER PROOF LOCKING OUTRIGGER JACKS
  • 4 EA BUBBLE TYPE TRAILER LEVEL GUIDES
  • 2 EA 8,0000 LB AXLES EACH ELECTRIC BRAKE
  • TORSION AXLE INDEPENDENT SUSPENSION
  • FULL SIZE SPARE UNDER DECK
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 5 EA 16 PLY 215-75-17.5 RADIAL TIRES
  • 5 EA 17.50 POWDER COATED SOLID STEEL WHEELS Lifetime Warranty.
  • 4 SETS WHEEL SETS LOOSE NUT INDICATORS
  • MUD FLAPS
  • 1 EA TRAILER STEP-UP, WITH 1EA STEP HAND RAIL
  • DOT AND TRANSPORT CANADA LED LIGHTING PACKAGE AND REFLECTIVE TAPE
  • 36” STEEL LOCKING ALUMINUM POWDER COATED BLACK DIAMOND PLATE TOOL BOX SECURED
  • FLASHING EMERGENCY LIGHTS
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • 12 POSITION GUY KIT, UNGUYED FOOT PRINT SAME AS OUTRIGGER FOOT PRINT
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS

 

  1. COMPREHENSIVE OPERATIONS MANUAL, BEST WARRANTY IN INDUSTRY AND LIFETIME WARRANTY ITEMS NOT SEEN IN INDUSTRY, 24 HOUR SUPPORT
  2. HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  3. CAN BE PULLED WITH STANDARD 3/4 + TON CIVILIAN OR MILITARY TRUCK FOR OFF ROAD 4X4 RECOMMENDED
  4. BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  5. ENGINEERED AND DESIGNED TO MEET THE RIGORS DEMANDS OF ALL MILITARY AND ENVIRONMENTALS, BEING AIRCRAFT AND HELICOPTER TRANSPORTABLE A REAL PLUS.
  6. DATA MATRIX BAR CODE TAGGING ON ALL GOVERNMENT  ORDERS INDICATING MFG, VIN NUMBER, SALE DATE, PURCHASER
  • LOCKOUT KIT, FOR CLIMBER SAFETY
  • SAFETY CLIMB, FOR CLIMBER SAFETY
  • LIGHTNING PROTECTION
  • FAA LIGHTING
  • EXTRA REELS
  • SLIDE OUT
  • SAFETY RAILS
  • PAN ADAPTER
  • STARR MOUNT
  • GROUNDING KIT
  • TOWER COVERS
  • GENERATORS
  • FUEL TANKS
  • FUEL PUMPS
  • LIGHTING PROTECTION KIT

LMS 85 HW CR WEIGHTS AND DIMENSIONS

  • FITS IN A 40FT CONTAINER
  • 10,300 POUNDS SHIPPING WEIGHT
  • 6800 LBS EMPTY TRAILER
  • 16,000 LBS GVWR
  • 5,700 LBS TRAILER USE FULL LOAD
  • 32′.5″ LONG TOTAL UNIT
  • 7′ 2″ TALL, HORIZONTAL NESTING
  • 7′ 7″ WIDE TRAILER
  • 26′ TOWER RETRACTED MINIMUM HEIGHT

GENERAL TOWER SPECIFICATIONS  

Specifications 

Ratings

 

Facts

Tower Height Extended+/- 85” AGLFive (5) sections-21’0” (6.4m) Each
Tower Height Nested+/-22ft Vertical Nesting+/-10’4”-Horizontal Nesting
Maximum operational wind speed75MPH, contingent on client loadActual Rating per Client-specific load
Maximum survival wind speed95MPH, contingent on client loadActual Rating per Client-specific Load
Maximum wind surface area30 Sq. Ft
Maximum wind speed at erection35MPH
Payload weight at top of towerMax to 1134kg/2500lbs @120VAC/60HzCertified to 2500Lbs
Payload Wt. Top of Tower Single StageMax to 612kg/1350lbs A120VAC/60HzCertified to 950Lbs
Payload Wt. Top of Tower Dual StageMax to 1134kg/2500lbs @120VAC/60HzCertified to 2500Lbs
Payload Weight on Tower During TiltMax to 612kg/1350lbs A120VAC/60HzCertified to 950Lbs
Erection/Retraction SpeedSingle Stage ProcessDirect Drive +/-11.3Min.
Erection/Retraction SpeedDual Stage ProcessDirect Drive +/-22Min.
Winch Tilt Speed3/8” Aircraft quality cableDirect Drive +/-1Min.
Power Requirement to Operate TowerElectric Drive System110VAC / 60Hz / 1PH
Power Requirement to Operate TowerElectric Drive System240VAC / 50Hz / 1PH
Erection/ Retraction Motor HP2.5HP 1-Phase- Optional single gear boxDual Stage Configuration Standard
Single Gear Box RatioDirect DriveMin. 446:1
Dual Gear Box RatioDirect DriveMin. 900:1
Motor RPMDirect Drive1725 Each (60Hz)

 APPROXIMATE STANDARD MATERIAL SPECIFICATIONS

Standard superior Tower Legs – Grade B, US Carbon SteelASTM A500-07, A53-12
Optional Legs – HSS ASTM DOM1026 Alloy/A513 ~ 70-95 Ksi Yield Strength
Structural Shapes Solid Rod, Bars, Angle, Etc.ASTM A-500 ~ 50 Ksi Yield Strength
Structural Steel Square TubeASTM A-500 ~ 50 Ksi Yield Strength
Horizontals~ Flat BarASTM A-500 ~ 50 Ksi Yield Strength
Welded E70 ElectrodeAWS D1.1 Latest Rev.
Hot Dipped Galvanize Tower ~ ASTM A-123ASTM A-500 ~ 50 Ksi Yield Strength
Hardware/BoltsECO Guard Grade 9 Bolts

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).

 Lifetime Warranty as described on website Https://landamobilesystems.com/company/lms-warranty

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

World leader in mobile tower innovation and reliable engineered designs including skid platforms towers, standard units, super high 250’, CR units assembled and ready to deploy shipping in 20’ and 40’ containers up to 202 Ft high.  Never a tower failure in the history of the company of a deployed engineered tower. Super lift ability up to 2500lbs and the highest wind survivability exceeding any lattice steel telescopic structure made in the USA. No guy wires required at any elevation to a maximum wind-load and design wind velocity

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SERVICE DISABLED VETERAN OWNED SMALL BUSINESS USMC “SDVOSB” | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large