LMS 85 CR CONTAINER READY PORTABLE TOWER

LMS 85 CR

LMS= Landa Mobile Systems
CR = Container Ready
85 = height in feet

  • 85’ MODEL 
  • 5 EA-21’ SECTIONS, Lifetime Warranty
  • ALL SECTIONS ASTM A500-07, A53-12, GRADE B, CARBON STEEL, SCHEDULE 40 STRUCTURAL TUBING  Lifetime Warranty
  • TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY SUPPORTS OUR COMPLETE LINE OF LATTICE TOWERS.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • DUAL TORSION ROD DESIGN WITH MULTIPLE STIFFENER PLATES 
  • HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER
  • 900:1 WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT 
  • BACKUP POWERLESS KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL
  • THEFT PROOF CABLE STORAGE REEL, OPTIONAL ELECTRIC, MULTIPLE REELS, SPLIT REELS AND HANDLES
  • 6 EA CABLE GUIDE RINGS
  • WEATHERPROOF (LOCKING) CONTROL PANEL 
  • 2 EA SWITCHES FOR TOTAL DEPLOYMENT CONTROLS 
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH LOAD
  • 45 MIN TO FULL ERECTION
  • HYDRAULIC SYSTEMS TILTING WITH 1000 Lb HEAD LOAD
  • 2000 Lb TILT PAYLOAD
  • 2500Lb PAYLOAD CERTIFIED
  • 2900Lb VERTICAL LIFT ABILITY
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • REDUNDANT TOWER RETRACTION CABLES MARINATED IN LPS3
  • 4″, 5″AND 6″ STEEL CUSTOM BEARING FITTED LANDA PULLEYS  
  • ALL ECO COATED GRADE 9 BOLTS  
  • MOTOR DRIVE UNITS  Main drive motor is wash-down direct drive worm gear extreme environment w/moisture drain.  All units are designed to withstand the most severe  -120 / 160 degrees Fahrenheit conditions without failure.
  • STEEL SAFETY END CAP AND LIFTING DRUM SAFETY COVERS
  • LMS NEVER FAIL KEY SYSTEM INCLUDED Patent Pending LMS key system. LMS units are EMP secure with both tilt and erection systems backed up and designed to be operated by hand with LMS Key system and a cordless in case of a remote no power. The Lattice Towers are 100% Redundant backed up as a true emergency unit in the field, and you will not be let down when its critical. Lifetime Warranty
  • LMS OPTIONS

    DEPOLYED UNITS

    TOWER TRAILER
  • TOWER TRAILER Structural Outrigger and Tower tilt assembly have a Lifetime Warranty (not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).
  • DIAMOND PLATE 11 GAUGE DECK, 22′ LONG X 7’ 6” WIDE
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS.FLAT STEEL WELDED TO RAIL  Lifetime Warranty
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • INTEGRATED TOWER BASE TILT SYSTEM CONSTRUCTED WITH 4”X 4”X 1/4” STRUCTURAL TUBING FOR EXTRA STRENGTH 
  • 11’ LONG OPEN DECK SPACE IN FRONT OF TOWER ASSEMBLY MOUNT
  • ALL STEEL CONSTRUCTION 10” WIDE BEAM CONSTRUCTION, NO ALUMINUM
  • 11 HOLE ADJUSTABLE COUPLER CHANNEL W/REMOVABLE 2 5/16″ BALL HITCH AND PINTLE INCLUDED, OPT. GOOSENECK OR FIFTH WHEEL
  • 7 PIN RV-TYPE CONNECTOR
  • 10,000 LB SIDE PULL SPRING LOADED TONGUE JACK 
  • EMERGENCY TRAILER BREAKAWAY DEVICE
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • 2 EA HEAVY DUTY SAFETY CHAINS
  • 4 EA TUBE GROUND ROD ATTACH POINT HOLDERS WELDED TO OUTRIGGERS
  • 4 EA TELESCOPIC CRANE STYLE OUTRIGGERS
  • 4 EA ADJUSTABLE 7,000 LB LOCKING JACKS W/ PADLOCK PROVIDED
  • 4 EA GALVANIZED 2′ X 2′ OUTRIGGER JACK PADS
  • 4 EA SLIDE OUTRIGGER PACKAGE WITH ROLLER BEARINGS
  • 4 EA LOCKING OUTRIGGER JACKS
  • FOOTPRINT 20′ X 40’ WHEN FULLY DEPLOYED
  • 4 EA BUBBLE TYPE TRAILER LEVEL GUIDES
  • 2 EA 7,000LB AXLES EACH ELECTRIC BRAKES, TORSION AXLE INDEPENDANT SUSPENSION 14,000 GVWR
  • FULL SIZE SPARE UNDER DECK
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 5 Ea 16 PLY 215-75-17.5 RADIAL TIRES
  • 5 EA 17.50 POWDER COATED SOLID STEEL WHEELS  Lifetime Warranty
  • 4 SETS WHEEL SETS LOOSE NUT INDICATORS
  • 1/4 ” LINE X SPRAYED ON FULL DECK AND FRONT OF TRAILER FOR ANTI SLIP
  • 1 EA TRAILER STEP AND HAND RAIL 
  • DOT AND TRANSPORT CANADA LED LIGHTING PACKAGE AND REFLECTIVE TAPE
  • 36” STEEL LOCKING ALUMINUM POWDER COATED BLACK DIAMOND PLATETOOL BOX
  • FLASHING EMERGENCY LIGHTS
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • GUYED TO OUT RIGGERS WITH 20′ X 40′ FOOT PRINT HIGH WIND
  • 9 POSITION GUY KIT
  • UNGUYED FOOT PRINT SAME AS OUTRIGGER FOOT PRINT
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT FOR REMOTE
  • MUD FLAPS
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • 24 HOUR SUPPORT
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • CAN BE PULLED WITH STANDARD 3/4 TON PICKUP TRUCK FOR OFF ROAD 4X4 RECOMMENDED
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT FOR REMOTE
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  • CAN BE PULLED IN WITH BULLDOZERS, AND DEPLOYED MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS

A FEW OPTIONS

  • LOCKOUT KIT, FOR CLIMBER SAFETY
  • SAFETY CLIMB, FOR CLIMBER SAFETY
  • LIGHTNING PROTECTION
  • FAA LIGHTING
  • EXTRA REELS
  • SLIDE OUT
  • SAFETY RAILS
  • PAN ADAPTER
  • STARR MOUNT
  • GROUNDING KIT
  • TOWER COVERS
  • GENERATORS
  • FUEL TANKS
  • FUEL PUMPS
  • LIGHTING PROTECTION KIT

LMS 85 HW CR WEIGHTS AND DIMENSIONS

  • 10,300 POUNDS SHIPPING WEIGHT
  • 6800 LBS EMPTY TRAILER
  • 32′ 3″ LONG
  • 7′ 2″ TALL
  • 7′ 7″ WIDE
  • 27′ RETRACTED HEIGHT
  • 2000 LBS TILT HEAD LOAD MAX
  • 2500 LB HEAD LOAD MAX
  • 3700 LBS USEFUL LOAD
  • 21′ 10″ DECK
  • 45′ X 20′ DEPLOYED FOOT PRINT

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

LMS 85 CR PRODUCT DESCRIPTION 2018-Good

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large