LMS 120 SM SKID MOUNT PORTABLE TOWER

MODEL LMS 120 SM SKID MOUNT PORTABLE TOWER

  • 120’ tall, 6 EA SECTION LEGS ASTM A500-07, A53-12, GRADE B, US CARBON STEEL Lifetime Warranty
  • OPTIONAL HSS ASTM DOM SECTION LEGS Lifetime Warranty
  • 46″ SKID INTEGRATED TOWER TILT BASE ASSEMBLY.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • 5’ STARR MOUNT FOR LARGE MICROWAVE DISH PLACEMENT OPTIONAL Lifetime Warranty.
  • TOWER HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER
  • 900:1 AND 446:1 ADJUSTABLE WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT
  • CLIMBABLE MAN-RATED TOWER WHEN EQUIPPTED WITH OPTIONAL SAFETY CLIMB
  • BACKUP EMP KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL IN CASE OF REMOTE NO POWER. Lifetime Warranty
  • TILTED TO THE VERTICAL POSITION BY 9,000LB CUSTOM PULL DOWN WINCH
  • TOWER IS AUTOMATICALLY ELEVATED BY 2 ½ HP TOTALLY ENCLOSED FAN COOLED (TEFC), WASH DOWN RATED, DIRECT DRIVE STAINLESS SHAFT WINCH MOTOR AND HYDRAULIC GEARBOX ASSEMBLY WITH NO BELTS OR CHAINS.
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH 950LB CUSTOMERS HEAD LOAD
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • INGRESS PROTECTION, IP65 WEATHERPROOF (LOCKING) CONTROL PANEL
  • 25’ FULL OPERATION REMOTE CONTROL CABLE OPTIONAL
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • 2 EA SWITCHES FOR TOTAL DEPLOYMENT CONTROL
  • 2 EA ILLUMINATED FUNCTION LAMPS FOR TILTING AND TELESCOPIC
  • 1 EA RED KEYED POWER DISCONNECT FOR ALL FUNCTION CONTROLS
  • THEFT PROOF CABLE STORAGE REEL WITH GREASE NIPPLE Lifetime Warranty.
  • 6 EA CABLE GUIDE RINGS Lifetime Warranty.
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • ALL TOWER SECTIONS ARE OPERATED ONLY WITH CERTIFIED 3/8” DIAMETER 7/19 GALVANIZED AIRCRAFT QUALITY CABLES. 
  • ALL CABLES HAVE BEEN MARINATED IN LPS3 FOR LONG LIFE ANTI CORROSION FOR HARSH SALT WATER ENVIRONMENTS.  CERTIFIED BREAK STRENGTH OF 14,000lb.
  • 4″, 5″AND 6″ GALVANIZED STEEL SMART CUSTOM BEARINGS FITTED PULLEYS MARINATED IN LPS3
  • ALL ECO-GUARD (TM) ECO COATED GRADE 9 BOLTS HAVING GREATER TENSILE STRENGTH THAN GRADE 8, DESIGNED FOR USE IN HIGH-STRESS AND HIGH STRENGTH APPLICATIONS. COATING THAT MEETS 1000HRS OF SALT SPRAY CORROSION RESISTANCE FOR A MAXIMUM TENSILE STRENGTH OF TYPICALLY 180,000PSI
  • MAIN DRIVE MOTOR IS WASH-DOWN DIRECT DRIVE WORM GEAR EXTREME ENVIRONMENT W/ MOISTURE DRAIN. OPTIONAL STAINLESS-STEEL MOTOR CASING.
  • ALL UNITS ARE DESIGNED TO WITHSTAND THE MOST SEVERE -120 / 160 DEGREE FAHRENHEIT CONDITIONS
  • CAN BE OPERATED IN MAXIMUM 99% HUMIDITY
  • GALVANIZED STEEL SAFETY GUARDS IN PLACE PER “OSHA SAFETY GUARD STANDARDS” ON ALL ROTATABLE AND PROTECTIVE GRATE SCREEN OVER DUAL CABLE ROTATABLE DRUMS, AS WELL AS END SHAFTS Lifetime Warranty
  • ALL LMS UNITS HAVE REDUNDANT MANUAL DEPLOYMENT SYSTEMS. BOTH TILT AND ERECTION, TRUE EMERGENCY UNITS IN THE FIELD. Lifetime Warranty

DEPOLYED UNITS

TOWER SKID

  • AUTOMATIC PLATFORM LEVELING JACK SYSTEM
  • DIAMOND PLATE 11 GAUGE DECK 
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS.FLAT STEEL WELDED TO RAIL Lifetime Warranty
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • 1/4″ LINEX SPRAYED DECK
  • OPEN DECK SPACE IN FRONT OF TOWER ASSEMBLY MOUNT
  • ALL STEEL CONSTRUCTION 12” WIDE BEAM CONSTRUCTION, NO ALUMINUM
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • FORK LIFT TUBES UNDER REAR Lifetime Warranty
  • 4 EA TELESCOPIC CRANE STYLE OUTRIGGERS Lifetime Warranty 
  • 4 EA HEAVY DUTY OUTRIGGER SAFETY CHAINS  
  • 4 EA ADJUSTABLE SAFETY LOCKING OUTRIGGERS 7,000Lb JACKS, WITH LOCKS
  • 4 EA GALVANIZED STEEL 2 X 2 JACK SHOE PLATES
  • SLIDE OUTRIGGER PACKAGE WITH ROLLER BEARINGS
  • 4 EA BUBBLE TYPE TRAILER LEVEL GUIDES
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 36” STEEL LOCKING TOOL BOX
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  • CAN BE PULLED IN WITH BULLDOZERS AND DEPLOYED MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • 24 HOUR SUPPORT
  • D-RINGS FRONT AND REAR FOR PULLING SKID
  • 4 EA GREEN GROUND ROD ATTACH POINTS
  • BUILT IN DECK GROUND ROD STORAGE COMPARTMENT
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED, OPTION

A FEW OPTIONS

  • LOCKOUT
  • LIGHTNING PROTECTION
  • FAA LIGHTING
  • EXTRA REELS
  • SLIDE OUT
  • SAFETY RAILS
  • PAN ADAPTER
  • STARR MOUNT
  • GROUNDING KIT
  • TOWER COVERS
  • MOTOR COVERS
  • GENERATORS
  • FUEL TANKS
  • FUEL PUMPS
  • LIGHTING

WEIGHTS AND DIMENSIONS

  • 10,600LB SHIPPING WEIGHT
  • 6,800LB EMPTY TRAILER
  • 32’10” LONG
  • 7’1″ TALL
  • 7’6″ WIDE
  • 27′ RETRACED HEIGHT
  • 45′ X 20′ DEPLOYED FOOTPRINT
  • 19′ RETRACTED MAXIMUM HEIGHT
  • FITS IN 20 FT CONTAINER

 

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

GENERAL TOWER SPECIFICATIONS

Specifications 

Ratings

 

Facts

Tower Height Extended+/- 120′ AGLSIX (6) sections-21’0” (6.4m) Each
Tower Height Nested+/-22ft Vertical Nesting+/-10’4”-Horizontal Nesting
Maximum operational wind speed65MPH, contingent on client loadActual Rating per Client-specific load
Maximum survival wind speed85MPH, contingent on client loadActual Rating per Client-specific Load
Maximum wind surface area30 Sq. Ft
Maximum wind speed at erection35MPH
Payload weight at top of towerMax to 1134kg/2500lbs @120VAC/60HzCertified to 2500Lbs
Payload Wt. Top of Tower Single StageMax to 612kg/1350lbs A120VAC/60HzCertified to 950Lbs
Payload Wt. Top of Tower Dual StageMax to 1134kg/2500lbs @120VAC/60HzCertified to 2500Lbs
Payload Weight on Tower During TiltMax to 612kg/1350lbs A120VAC/60HzCertified to 950Lbs
Erection/Retraction SpeedSingle Stage ProcessDirect Drive +/-11.3Min.
Erection/Retraction SpeedDual Stage ProcessDirect Drive +/-22Min.
Winch Tilt Speed3/8” Aircraft quality cableDirect Drive +/-1Min.
Power Requirement to Operate TowerElectric Drive System110VAC / 60Hz / 1PH
Power Requirement to Operate TowerElectric Drive System240VAC / 50Hz / 1PH
Erection/ Retraction Motor HP2.5HP 1-Phase- Optional single gear boxDual Stage Configuration Standard
Single Gear Box RatioDirect DriveMin. 446:1
Dual Gear Box RatioDirect DriveMin. 900:1
Motor RPMDirect Drive1725 Each (60Hz)

APPROXIMATE STANDARD MATERIAL SPECIFICATIONS

Standard superior Tower Legs – Grade B, US Carbon SteelASTM A500-07, A53-12
Optional Legs – HSS ASTM DOM1026 Alloy/A513 ~ 70-95 Ksi Yield Strength
Structural Shapes Solid Rod, Bars, Angle, Etc.ASTM A-500 ~ 50 Ksi Yield Strength
Structural Steel Square TubeASTM A-500 ~ 50 Ksi Yield Strength
Horizontals~ Flat BarASTM A-500 ~ 50 Ksi Yield Strength
Welded E70 ElectrodeAWS D1.1 Latest Rev.
Hot Dipped Galvanize Tower ~ ASTM A-123ASTM A-500 ~ 50 Ksi Yield Strength
Hardware/BoltsECO Guard Grade 9 Bolts 

Not including standard wear items i.e. electrical, brakes, tires, bearings, jacks, rubber and plastics).

Lifetime Warranty as described on website Https://landamobilesystems.com/company/lms-warranty

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large