LMS 65 SMS  SKID MOUNT PORTABLE TOWER

LMS 65 SMS SHORT, FOR SHIPPING AND STORAGE IN A 20′ CONTAINER.

LMS= Landa Mobile Systems
22′ – 65′ Deployed height
SM= skid mounted 
SMS= Short build for 20′ container storage and shipping

 65’ SMS MODEL 

  • 36” FACE SUPER HEAVY DUTY A SECTION 
  • 5 SECTIONS, ALL SECTIONS ASTM A500-07, A53-12, GRADE B, CARBON STEEL, SCHEDULE 40 STRUCTURAL TUBING   
  • 46″ TRAILER INTEGRATED TOWER TILT BASE ASSEMBLY SUPPORTS OUR COMPLETE LINE OF LATTICE TOWERS 
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS
  • DUAL TORSION ROD DESIGN
  • MULTIPLE STIFFENER PLATES IN CRITICAL AREAS
  • HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER
  • WEATHERPROOF (LOCKING) CONTROL PANEL, LIMIT SWITCHES FOR TILT AND EXTENSION OPERATION
  • 900:1 WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT UP TO 85’
  • BACKUP POWERLESS KEY OPERATION ALLOWING TOWER TO BE RAISED OR LOWERED WITH A CORDLESS DRILL 
  • THEFT PROOF CABLE STORAGE REEL, OPTIONAL ELECTRIC, MULTIPLE REELS, SPLIT REELS AND HANDLES
  • 6 EA CABLE GUIDE RINGS
  • WEATHERPROOF (LOCKING) CONTROL PANEL
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH LOAD DUAL HYDRAULIC 20,000LB TILT RAM SYSTEM
  • 22 MIN TO FULL ERECTION
  • 9 POSITION GUY KIT
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • 110VAC 60HZ / OPTIONAL 240VAC 50HZ
  • HIGH STRENGTH AIRCRAFT QUALITY CABLES MARINATED IN LPS3
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • 2000Lb TILT HEADLOAD
  • 2500Lb PAYLOAD CERTIFIED 
  • 2900Lb VERTICAL LIFT ABILITY
  • REDUNDANT TOWER RETRACTION CABLES
  • 4″, 5″, AND 6″ STEEL CUSTOM BEARING FITTED LANDA PULLEYS
  • TOWER BUILT WITH ALL ECO COATED GRADE 9 BOLTS
  • MOTOR DRIVE UNITS  Main drive motor is wash-down direct drive worm gear extreme environment w/moisture drain.  All units are designed to withstand the most severe  -120 / 160 degrees Fahrenheit conditions without failure. 
  • LMS NEVER FAIL KEY SYSTEM INCLUDED Patent Pending LMS key system. LMS units are EMP secure with both tilt and erection systems backed up and designed to be operated by hand with LMS Key system and a cordless in case of a remote no power. The Lattice Towers are 100% Redundant backed up as a true emergency unit in the field, and you will not be let down when its critical.

LMS OPTIONS

DEPOLYED UNITS

TOWER SKID

  • AUTOMATIC PLATFORM LEVELING JACK SYSTEM
  • DIAMOND PLATE 11 GAUGE DECK 19’2″ LONG X 7’ 6” WIDE
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS.FLAT STEEL WELDED TO RAIL
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • LINEX SPRAYED DECK
  • INTEGRATED TOWER BASE TILT SYSTEM CONSTRUCTED WITH 4”X4”X1/4” STRUCTURAL TUBING FOR EXTRA STRENGTH  
  • OPEN DECK SPACE IN FRONT OF TOWER ASSEMBLY MOUNT
  • ALL STEEL CONSTRUCTION 12” WIDE BEAM CONSTRUCTION, NO ALUMINUM
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • FORK LIFT TUBES UNDER REAR LENGTH WISE 
  • 4 EA AUTO LEVELING SKID SYSTEM
  • 4 EA TELESCOPIC CRANE STYLE OUTRIGGERS 
  • 4 EA HEAVY DUTY OUTRIGGER SAFETY CHAINS
  • 4 EA ADJUSTABLE SAFETY LOCKING OUTRIGGER 7,000Lb JACKS, WITH LOCKS
  • 4 EA GALVANIZED STEEL 2 X 2 JACK SHOE PLATES
  • SLIDE OUTRIGGER PACKAGE WITH ROLLER BEARINGS
  • 4 EA BUBBLE TYPE TRAILER LEVEL GUIDES
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 36” STEEL LOCKING TOOL BOX
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  • CAN BE PULLED IN WITH BULLDOZERS AND DEPLOYED MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • 24 HOUR SUPPORT
  • EXTRA HEAVY D-RINGS FRONT FOR PULLING SKID
  • 4 EA GREEN GROUND ROD ATTACH POINTS
  • BUILT IN DECK GROUND ROD STORAGE COMPARTMENT
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED, OPTION

A FEW OPTIONS

  • 4000 Lb TILT HEADLOAD
  • MIL SPEC PAINT SCHEME
  • MAN RATED LOCKOUTS
  • MAN RATED SAFETY CLIMB  
  • LIGHTNING PROTECTION
  • FAA LIGHTING
  • EXTRA REELS
  • SLIDE OUTS
  • SAFETY RAILS
  • PAN ADAPTERS
  • STARR MOUNT FOR LARGE MICROWAVE DISHES AND TORQUE STABILITY
  • GROUNDING KIT
  • TOWER COVERS
  • MOTOR COVERS
  • GENERATORS
  • FUEL TANKS
  • FUEL PUMPS
  • LIGHTING
  • CUSTOM EQUIPMENT CONFIGURATION BUILDS

WEIGHTS AND DIMENSIONS

  • TBD LBS SHIPPING WEIGHT
  • TBD EMPTY TRAILER
  • 41’5″ DEPLOYED LENGTH WITH OUT-RIGGERS EXTENDED
  • 17′ 10″ DEPLOYED WIDTH WITH OUT-RIGGERS EXTENDED
  • 7′ 6″ WORKING DECK WIDTH WITH OUT-RIGGERS NOT EXTENDED
  • 7′ 4″ DECK WIDTH WORKING SURFACE
  • 19′ 2″ DECK LENGTH WITH OUT-RIGGERS NOT EXTENDED
  • 18′ 2″ DECK LENGTH WORKING SURFACE
  • 1′ 1″ DECK HEIGHT ABOVE GROUND
  • 22′ RETRACTED MINIMUM HEIGHT
  • 2000 LBS TILT HEAD LOAD
  • 2500 LB HEAD LOAD

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

US Department of Commerce, Bureau of Industry and Security approved exportable goods.

LMS towers utilize 2 3/8” OD ASTM A500-07, A53-12 grade B, Carbon steel schedule 40 steel pipe, 55.3 KSI yield strength in constructing the complete tower assembly.  Solid rod cross bracing with back filled welds are utilized on the complete tower. “Not machine applied” like others. incorporatING multiple Torsion Rods and Stiffener Plates for added strength. The main body of the tower has been analyzed utilizing the commercially available software TNX Tower version 0.0.8 (previously known as RISA Tower & ERI Tower).  Full operational and Cad animated erection and 3D print available with equipment placement models.

PORTABLE TOWER MANUFACTURING

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large