LMS 85 SMS

SKID MOUNT PORTABLE TOWER, AUTOMATIC HYDRAULIC LEVELING

 FOR SHIPPING AND STORAGE IN A 20′ CONTAINER

  • 85’ tall, 5 EA SECTION LEGS ASTM A500-07, A53-12, GRADE B, US CARBON STEEL Lifetime Warranty
  • OPTIONAL HSS ASTM DOM SECTION LEGS Lifetime Warranty
  • 46″ SKID INTEGRATED TOWER TILT BASE ASSEMBLY.  Lifetime Warranty
  • 3 SECTOR ANTENNA MOUNT / CUSTOM MOUNT DESIGNS AVAILABLE
  • 5’ STARR MOUNT FOR LARGE MICROWAVE DISH PLACEMENT OPTIONAL Lifetime Warranty.
  • TOWER HOT DIPPED GALVANIZED FINISH EN ISO 1461/ASTM A123/CSA G164 FOR ALL WEATHER
  • 900:1 AND 446:1 ADJUSTABLE WORM DRIVE ALLOWING TOWER TO BE SAFELY DEPLOYED AT ANY HEIGHT
  • CLIMBABLE MAN-RATED TOWER WHEN EQUIPPED WITH OPTIONAL SAFETY CLIMB
  • TOWER IS AUTOMATICALLY ELEVATED BY 2 ½ HP TOTALLY ENCLOSED FAN COOLED (TEFC), WASH DOWN RATED, DIRECT DRIVE STAINLESS SHAFT WINCH MOTOR AND HYDRAULIC GEARBOX
  • 1 MINUTE FROM HORIZONTAL TO VERTICAL WITH 2000 LB CUSTOMERS HEAD LOAD
  • 11 MINUTES FULL TOWER ERECTION SINGLE STAGE PROCESS OFFERS REDUCED LIFT WEIGHT OR 22 MINUTES DUAL STAGE FULL 2000 LB LIFT
  • HEAVY DUTY UPPER AND LOWER LIMIT SWITCHES
  • INGRESS PROTECTION IP65, WEATHERPROOF (LOCKING) CONTROL PANEL
  • 25’ FULL OPERATION REMOTE CONTROL CABLE OPTIONAL
  • 110VAC 60HZ / 240VAC 50HZ
  • 2 EA SWITCHES FOR TOTAL DEPLOYMENT CONTROL
  • 2 EA ILLUMINATED FUNCTION LAMPS FOR TILTING AND TELESCOPIC
  • 1 EA RED KEYED POWER DISCONNECT FOR ALL FUNCTION CONTROLS
  • THEFT PROOF CABLE STORAGE REEL WITH GREASE NIPPLE Lifetime Warranty.
  • 6 EA CABLE GUIDE RINGS Lifetime Warranty.
  • PATENTED DERLIN MAST GUIDE BLOCKS
  • ALL TOWER SECTIONS ARE OPERATED ONLY WITH CERTIFIED 3/8” DIAMETER 7/19 GALVANIZED AIRCRAFT QUALITY. 
  • ALL CABLES HAS BEEN MARINATED IN LPS3 FOR LONG LIFE ANTI CORROSION FOR HARSH SALT WATER ENVIRONMENTS.  CERTIFIED BREAK STRENGTH OF 14,000lb.
  • 4″, 5″AND 6″ GALVANIZED STEEL SMART CUSTOM BEARINGS FITTED PULLEYS MARINATED IN LPS3
  • ALL ECO-GUARD (TM) ECO COATED GRADE 9 BOLTS HAVING GREATER TENSILE STRENGTH THAN GRADE 8, DESIGNED FOR USE IN HIGH-STRESS AND HIGH STRENGTH APPLICATIONS. COATING THAT MEETS 1000HRS OF SALT SPRAY CORROSION RESISTANCE FOR A MAXIMUM TENSILE STRENGTH OF TYPICALLY 180,000PSI
  • MAIN DRIVE MOTOR IS WASH-DOWN DIRECT DRIVE WORM GEAR EXTREME ENVIRONMENT W/MOISTURE DRAIN. OPTIONAL STAINLESS STEEL MOTOR CASING.
  • < .75 DEGREE AZIMUTH
  • < 1.5 DEGREE INCLINATION
  • ALL UNITS ARE DESIGNED TO WITHSTAND THE MOST SEVERE -120/ 160 DEGREES FAHRENHEIT CONDITIONS.
  • CAN BE OPERATED IN MAXIMUM 99% HUMIDITY
  • GALVANIZED STEEL SAFETY GUARDS IN PLACE PER “OSHA SAFETY GUARD STANDARDS” ON ALL ROTATABLE AND PROTECTIVE GRATE SCREEN OVER DUAL CABLE ROTATABLE DRUMS, AS WELL AS END SHAFTS. Lifetime Warranty
  • ALL LMS UNITS HAVE REDUNDANT MANUAL DEPLOYMENT SYSTEMS. BOTH TILT AND ERECTION, TRUE EMERGENCY UNITS IN THE FIELD Lifetime Warranty

LMS OPTIONS

DEPOLYED UNITS

TOWER SKID

  • AUTOMATIC PROGRAMMABLE PLATFORM LEVELING SYSTEM
  • DIAMOND PLATE 11 GAUGE DECK 
  • DECKS WATER-FALL SIDES ADD 400% TO STRENGTH VS.FLAT STEEL WELDED TO RAIL
  • ELECTRICAL COMPONENTS BONDED TO FRAME FOR SYSTEM GROUNDING
  • 1/4″ LINE-X SPRAYED DECK
  • OPEN DECK SPACE IN FRONT OF TOWER ASSEMBLY MOUNT
  • ALL STEEL CONSTRUCTION 12” WIDE BEAM CONSTRUCTION, NO ALUMINUM
  • 2 EA TWO HOLE 1/0 GROUND LUGS
  • FORK LIFT TUBES UNDER REAR LENGTH WISE 
  • 4 EA TELESCOPIC CRANE STYLE ROLLER BEARING EQUIPPED OUTRIGGERS 
  • 4 EA HEAVY DUTY OUTRIGGER PIN LOCKS AND SAFETY CHAINS
  • 4 EA ADJUSTABLE SAFETY LOCKING OUTRIGGER 12,000Lb JACKS, WITH PADLOCKS
  • 4 EA GALVANIZED STEEL 2 X 2 JACK SHOE PLATES
  • 4 EA BUILT IN BUBBLE TYPE SKID LEVEL GUIDES
  • ALL WEATHER PADLOCKS AND HIDE-A-KEY
  • 36” ALUMINUM, DIAMOND PLATE, POWDER COATED, LOCKING TOOL BOX
  • MAXIMUM ANGLE OF TERRAIN IN DEGREES FOR SAFE TRAILER DEPLOYMENT UP TO 7 DEGREES SIDE TO SIDE, 3.5 DEGREES FRONT TO BACK WITHOUT ADDITIONAL BLOCKING
  • GUY RADIUS AND ADDITIONAL ANCHOR DESIGN DEPENDENT ON LOADING AND WINDS TO BE DETERMINED BY ENGINEERING
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • EQUIPPED WITH LIFTING HOOKS IN ALL FOUR CORNERS FOR HELICOPTER LIFT
  • BUILT FOR ROUGH / INACCESSIBLE TERRAIN APPLICATIONS
  • CAN BE PULLED IN WITH BULLDOZERS AND DEPLOYED MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS
  • ENGINEERED AND DESIGNED TO MEET THE RIGOR DEMANDS
  • MIL-STD 810 TRAILER TIE-DOWN AND LIFTING LUGS
  • COMPREHENSIVE OPERATIONS MANUAL PLUS WARRANTY
  • 24 HOUR SUPPORT
  • 3 EXTRA HEAVY DUTY D-RINGS FRONT FOR PULLING SKID
  • 4 EA GREEN GROUND ROD ATTACH POINTS
  • SINGLE PERSON DEPLOYMENT
  • BUILT IN DECK GROUND ROD STORAGE COMPARTMENT
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED, OPTION

A FEW OPTIONS

  • MAN RATED LOCKOUTS
  • MAN RATED SAFETY CLIMB  
  • LIGHTNING PROTECTION
  • FAA LIGHTING
  • EXTRA REELS
  • SLIDE OUT
  • SAFETY RAILS
  • PAN ADAPTER
  • STARR MOUNT
  • GROUNDING KIT
  • TOWER COVERS
  • MOTOR COVERS
  • GENERATORS
  • FUEL TANKS
  • FUEL PUMPS
  • LIGHTING
  • CUSTOM EQUIPMENT CONFIGURATION BUILDS

WEIGHTS AND DIMENSIONS

  • 10,080 Lbs shipping weight
  • 41’5″ Deployed length with out-riggers extended
  • 17′ 10″ Deployed width with out-riggers extended
  • 7′ 4″ Deck width working surface
  • 19′ 2″ Deck length
  • 18′ 2″ Deck length working surface 
  • 1′ 1″ Deck height above ground
  • 21′ Retracted minimum height above ground
  • 2000 Lbs Tilt head load
  • 2500 Lb Head Load

PAINT OPTIONS/ CHOICE OF COLOR

  1. POLYURETHANE
  2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLY-AMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.

GENERAL TOWER SPECIFICATIONS

 

Specifications

 

Ratings

 

Facts

Tower Height Extended+/- 85’0” AGLFive (5) sections-17’0” (5.18m) Each
Tower Height Nested+/-21.3ft Vertical Nesting+/-19’-Horizontal Nesting
Maximum operational wind speed65MPH, Contingent on Client LoadActual Rating per Client-specific load
Maximum survival wind speed105MPH, Contingent on Client LoadActual Rating per Client-specific Load
Maximum wind surface area30 sq. ft.
Maximum wind speed at Erection45Mph (72.4km/hr.)(72.4km/hr.)
Payload Weight at Top of TowerMax to 1134kg/2500lbsCertified to 2500Lbs
Payload Wt. Top of Tower Single StageMax to 612kg/1350lbsCertified to 950Lbs
Payload Wt. Top of Tower Dual StageMax to 1134kg/2500lbsCertified to 2500Lbs
Payload Weight on Tower During TiltMax to 612kg/1350lbs A120VAC/60HzCertified to 950Lbs
Erection/Retraction SpeedSingle Stage ProcessDirect Drive +/-11.3Min.
Erection/Retraction SpeedDual Stage ProcessDirect Drive +/-22Min.
Hydraulic tilt speedDual 3” CylinderDirect Drive +/-1.2Min.
Power Requirement to Operate TowerElectric Drive System110VAC / 60Hz / 1PH
Power Requirement to Operate TowerElectric Drive System240VAC / 50Hz / 1PH
Erection/ Retraction Motor HP2.5HP 1-Phase~Optional single gearDual Stage Configuration Standard
Single Gear Box RatioDirect DriveMin. 446:1
Dual Gear Box RatioDirect DriveMin. 900:1
Motor RPMDirect Drive1725 Each (60Hz)

APPROXIMATE STANDARD MATERIAL SPECIFICATIONS

Standard superior Tower Legs – Grade B, US Carbon SteelASTM A500-07, A53-12
Optional Legs – HSS ASTM DOM1026 Alloy/A513 ~ 70-95 Ksi Yield Strength
Structural Shapes Solid Rod, Bars, Angle, Etc.ASTM A-500 ~ 50 Ksi Yield Strength
Structural Steel Square TubeASTM A-500 ~ 50 Ksi Yield Strength
Horizontals~ Flat BarASTM A-500 ~ 50 Ksi Yield Strength
Welded E70 ElectrodeAWS D1.1 Latest Rev.
Hot Dipped Galvanize Tower ~ ASTM A-123ASTM A-500 ~ 50 Ksi Yield Strength
Hardware/BoltsECO Guard Grade 9 Bolts 

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.