pagelmslogobanner

LMS 30 CRANK UP MAST

LMS 30 CRANK UP MAST

  • 150Lb / 68 k  HEAD-LOAD CAPABLE
  • WIND RATED TO 85 MPH WITH TWO FLAT PANEL ANTENNAS
  • 30′ STEEL CRACK UP TELESCOPIC MAST 4 SECTION
  • 39″ T-BAR TOP MOUNT
  • HEAVY DUTY MAST AND BASE
  • ALL TUBING IS 1/4″ THICK WALL
  • GALVANIZED FINISH
  • EXCLUSIVE DELRIN GUILD STABILIZATION WITHIN SECTIONS
  • 2ea 2500Lb HAND CRANK WINCHES FOR MAST OPERATIONS
  • NESTED HEIGHT 48″ WITH REAR MOUNTED NESTING PEDESTAL
  • 400 Lb / 181 Kg TOWER WEIGHT ONLY
  • LMS Options

LMS TRAILER

  • PATENT PENDING TRAILER DESIGN
  • 6′ WIDE x 16′ DECK 
  • 6″ CHANNEL HEAVY DUTY OFF ROAD CONSTRUCTION
  • 11 GAUGE  STEEL DIAMOND PLATE FLOOR
  • WATERFALL EDGES GIVING DECK 400% MORE STRENGTH
  • ADDED SUPPORT UNDER MAST
  • 3″ CHANNEL CROSS MEMBERS ON 16″ CENTERS
  • 4 WELD ON D-RINGS ON EACH CORNER OF THE  TRAILER
  • SINGLE AXLE, 3500 LB CAPACITY WITH 15″ WHEELS AND TIRES
  • 6 HOLE ADJUSTABLE COUPLER CHANNEL W/REMOVABLE 2 5/16″ BALL HITCH, OPT/PINTLE
  • 2Ea- SAFETY CHAINS
  • PULL OUT OUTRIGGERS ON 4 CORNERS WITH 5000# JACKS ON EACH
  • BATTERY BREAKAWAY
  • SPARE TIRE AND WHEEL MOUNTED ON SIDE OF FRONT YOKE
  • BLACK EPOXY FINISH
  • FLASHING EMERGENCY LIGHTS
  • REAR UPRIGHT MAST SUPPORT WELDED TO BED
  • US DOT AND CANADIAN CERTIFIED W/ LED LIGHTING
  • GUY KIT W/4-POSITION GUY KEVLAR ROPES, HOOK, AND TENSIONERS
  • OPERATIONS MANUALS
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • MILL SPEC ANTI CORROSION FINISH: FULL TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236 A. COATED WITH AN EPOXY POLYAMIDE OPTION
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • OVERSEAS SHIPMENT OPTION:  UNITS ARE COMPLETELY SPRAYED COATED TO PREVENT CORROSION
  • MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS

LMS ELECTRIC WINCH OPTION

  • 2 Ea 12 VOLT ELECTRIC 4000 Lb WINCHES WITH REMOTE
  • 2 Ea WINCH COVERS, WATERPROOF AND DUSTPROOF
  • 1 Ea 32″  X 118″ X 15″ WATERPROOF BOX FOR ELECTRIC COMPONENT
  • 1 Ea 725 AMP. 12 VOLT BATTERY
  • 1 Ea 12 VOLT BATTERY CHARGER 110 VOLT

SHIPPING DIMENSIONS

  • SHIPPING WEIGHT
  • 19 Ft / 5.79 m LONG
  • 6 Ft / 1.82 m WIDE
  • 7.5 Ft / 2.13 m TALL
  • 1680 Lb / 762 k 

 

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY |  NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.

contained in 41 C.F.R. 60-300.

 

image006  Nate-logo-large