pagelmslogobanner

LMS 50 CRANK UP MAST 50′ TELESCOPIC CRANK UP MAST

LMS 50 CRANK UP MAST

  • 150Lb / 68 Kg HEAD-LOAD 
  • EXCLUSIVE DELRIN GUIDE STABILIZATION WITHIN SECTIONS
  • WIND RATED TO 100 MPH WITH TWO FLAT PANEL ANTENNAS
  • GUYED TO OUTRIGGERS
  • 50′ STEEL CRANK UP TELESCOPIC MAST / 10-12′ extension option available 
  • 5 Ea SECTIONS
  • 39″ T-BAR TOP MOUNT FOR ANTENNA PLACEMENT, OPTIONS AVAILABLE
  • HEAVY DUTY MAST AND BASE
  • ALL TUBING 1/4″ THICK WALL
  • 48″ NESTED HEIGHT WITH REAR MOUNTED “NESTING PEDESTAL”
  • ENGINEERED AND DESIGNED TO MEET RIGORS DEMAND
  • COMPREHENSIVE OPERATIONS MANUAL 
  • 24 HOUR SUPPORT
  • OVERSEAS SHIPMENTS UNITS ARE COMPLETELY SPRAYED COATED TO PREVENT CORROSION 
  • 2 Ea 4000 LB LIFT, 12 VOLT ELECTRIC WINCHES W/REMOTE
  • 2 Ea WINCH COVERS, WATERPROOF AND DUSTPROOF
  • 875 Lb / 397 Kg TOWER ONLY WEIGHT, EXTENSIONS EXTRA.

LMS OPTIONS

LMS TRAILER

  • LMS PATENT PENDING TRAILER DESIGN
  • 6′ X 16′ DECK FLAT BED DESIGN
  • DIAMOND PLATE 11 GAUGE DECKING 
  • WATERFALL DECK EDGES GIVING 400% MORE STABILITY
  • LINEX SPRAYED TRAILER DECK OVER UNDERCOAT AND EPOXY PAINT
  • 6″ CHANNEL HEAVY DUTY OFF ROAD CONSTRUCTION
  • DECK  W/ ADDED SUPPORT UNDER MAST
  • 3″ CHANNEL CROSS MEMBERS ON 16″ CENTERS
  • 4 Ea WELD ON D-RINGS ON EACH CORNER OF THE  TRAILER
  • DUAL  3500 LB  AXLES
  • 6 Ea 15″ WHEELS AND TIRES
  • 6 HOLE ADJUSTABLE COUPLER CHANNEL W/REMOVABLE 2 5/16″ BALL HITCH, OPT/PINTLE
  • 2 Ea  SAFETY CHAINS
  • FLASHING EMERGENCY LIGHTS
  • PULL OUT OUTRIGGERS ON 4 CORNERS
  • 4 Ea 8000 Lb JACKS ON OUTRIGGERS
  • BATTERY BREAKAWAY
  • FULL SIZE SPARE TIRE MOUNTED ON SIDE OF FRONT YOKE
  • BLACK EPOXY FINISH
  • REAR UPRIGHT MAST SUPPORT WELDED TO BED
  • US DOT AND CANADIAN CERTIFIED W/ LED LIGHTING
  • BUILT ON STEP W/STEP UP HAND HOLD
  • HIGH WIND ALL TERRAIN OFF-ROAD APPLICATIONS
  • MILL SPEC ANTI CORROSION FINISH: FULL TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236 A. COATED WITH AN EPOXY POLYAMIDE OPTION
  • MIL-STD 209K TRAILER TIE-DOWN AND LIFTING LUGS
  • OVERSEAS SHIPMENT OPTION:  UNITS ARE COMPLETELY SPRAYED COATED TO PREVENT CORROSION
  • MILITARY DESIGNED TO MEET MOST MILITARY ENVIRONMENTAL AND TRANSPORT APPLICATIONS

LMS ALUMINUM  BLACK BOX 

  • 1 Ea 32″ x 118″ x 15″ WATERPROOF BOX FOR ELECTRIC COMPONENT
  • 1 Ea DEEP CYCLE 12 VOLT BATTERY
  • 1 Ea 80 AMP 110 VOLT BATTERY CHARGER OTHER VOLTAGES AVAILABLE
  • 1 Ea HAND HELP WINCH CONTROLLER
  • LMS SOLENOIDS AND WIRING FOR 12 VOLT BATTERY SYSTEM
  • 4 Ea STABILIZER JACKS
  • 1 Ea GUY KIT IN BLUE NYLON BAG
  • 4 Ea TECHNORA ROPES
  • 4 Ea TENSIONERS
  • 2 Ea WINCH COVERS

SHIPPING DIMENSIONS

  • 4100 Lb / 1860 Kg SHIPPING WEIGHT
  • 22.5 Ft / 6.85 m LONG
  • 6 Ft / 1.82 m WIDE
  • 8 Ft / 2.43 m TALL
  • 38 In / .85 m HEIGHT WITH TIRES TO TOP OF DECK
  • 25 In / .635 m TIRES REMOVED TO TOP OF DECK
  • 2 Ea-PER 40′ CONTAINER
  • 459 CUBE
  • 2900 LBS USEFULL LOAD

SOLAR OPTIONS / WI-FI FULL INTEGRATION

  • SOLAR ELECTRIC SYSTEM 100%
  • TURNKEY DESIGN W/ADJUSTABLE 480 WATT SOLAR ARRAY
  • PRE-WIRED LOCKABLE POWER WHITE ENCLOSURE
  • 40″X42″X16″  W/24 VOLT / DC 110 Ah BATTERY BANK
  • CHARGE CONTROLLER
  • SURGE PROTECTION
  • CIRCUIT BREAKERS FOR SOLAR
  • BATTERY AND LOAD BANKS INCLUDED
  • OPERATOR PANEL 24/48 VOLT / DC CONVERTER
  • 4 AMP CIRCUIT BREAKER UPGRADE
  • PANELS MOUNTED ON STEEL TUBING FRAME
  • SOLAR CONTROL BOX INTEGRATED W/ CLIENTS EQUIPMENT
  • UNITS BUILT SPECIFICALLY FOR MIDDLE EAST DEPLOYMENTS

PAINT OPTIONS/ CHOICE OF COLOR

      1. POLYURETHANE
      2. COMPLETE TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A, COATED WITH AN EPOXY POLYAMIDE INTERMEDIATE COAT CONFORMING TO MS MILL-P 2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING L-P- TO MS MILL-C-85285. ALL TOWER ASSEMBLY HARDWARE IS GALVANIZED OR ECO HCF GREEN COATED FOR STAND-ALONE CORROSION RESISTANCE.
      3. MANY PAINT OPTIONS, YOUR CALL.

North Carolina Hurricane 2016 DOT NEWS.  The 2 LMS50s a we purchased rode the storm out with no problems. They are located about 50 yards from Oregon Inlet. They saw sustained winds around 75 – 80 with gusts near 100. The cameras continued feeding images to the STOC throughout the event. Marked below are the locations of the towers.

storm-deployedment-locations LMS50-HD-deployed 

 

Certified Green Gin Poles are manufactured 100% from USA recycled steel. 

CERTIFIED SDVOSB | MANUFACTURING PLANT HUB ZONE | MINORITY OWNED COMPANY

Facility AWS D1.1 Certified, and 100% US Certified Welders welding to AWS, Certified 100% (AWS) D1.1 independent contractor inspected before leaving our facility. Towers are 100% hot dipped galvanized finished to EN ISO 1461/ASTM A123/CSA G164 and ANSI/EIA-TIA-222 G, per section 107 and CSA S37 standards. Steel is ASTM A500, grade B/C.  All products manufactured are Engineered and warranted. We have become the finest manufacturer of Gin Poles, Portable Towers, Climber Training Towers, Oil and Gas Flare Towers and Portable Shelters  in the Americas, thanks to team efforts and most important our customer support. “Service disabled veteran owned company built in America by Americans.” Minority owner and plant located in HUB zone.  Support our efforts as we support your freedom.

Landa Mobile Systems LLC supports and is in compliance affirmative action obligations on behalf of minorities, women, protected veterans and individuals with disabilities. Landa Mobile Systems, LLC complies fully with Executive Order 11246 and the applicable regulations of 41 CFR Part 60-1,-2; Section 503 of the Rehabilitation Act and the applicable regulations contained in 41 C.F.R. 60-741; as well as the Vietnam Era Veterans’ Readjustment Assistance Act and the applicable regulations contained in 41 C.F.R. 60-300.