LMS 65 CR CONTAINER READY MOBILE TOWER

LMS 65 CR Container Mobile Tower reaches up to 65 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs.  Platform safety includes LineX sprayed decks, locking outriggers, and jacks. Grounding lugs and ground rods are built-in.  Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE. You can also find other LMS news HERE.

Lattice Tower fits into a 40′ container, and the LMS 65 CRS fits into a 20′

  • 65’ tall with 6 ea section legs ASTM A500-07, A53-12, grade B, U.S. carbon steel. Lifetime Warranty
  • Tilt base assembly integrated into the trailer. Lifetime Warranty
  • Three-sector antenna mount custom mount designs are also available
  • 5’ Starr mount for large microwave dish placement with torque arm  Lifetime Warranty.
  • 16 ea ½” x 4” stiffener plates Lifetime Warranty.
  • Tower and tilt assembly painted finish for all-weather
  • Tilted to vertical by two ea 3.5″ heavy-duty hydraulic cylinders. Lifetime Warranty
  • Hydraulic tilt has a manual backup hand pump
  • One minute from horizontal to vertical with 2,000lb customer head load. 
  • 25 minutes full erection with load
  • 110VAC 60HZ or optional 240VAC 50HZ
  • Six ea. cable guide rings Lifetime Warranty
  • Patented Derlin mast guide blocks
  • Galvanized heavy-duty lifting and pull-down drums
  • All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality
  • Cables certified 14,000Lb break strength. 
  • All cables have been marinated in LPS3 for anti-corrosion
  • 4″, 5″, and 6″ galvanized steel innovative custom bearings fitted pulleys also marinated in LPS3
  • All Eco-Guard (TM) eco-coated grade 9 bolts 
  • All units are designed to withstand 120/160 degrees Fahrenheit

Tower Safety Features

  • The backup emergency key operation and hydraulic
  • Three ea. heavy-duty upper and lower limit switches
  • Weatherproof (locking) control panel with ingress protection IP65
  • Two ea. switches for total deployment control 
  • Two ea. Illuminated function lamps for tilting and telescopic. 
  • One ea. red keyed power disconnect for all function controls
  • Theft-proof cable storage reel with grease nipple. Lifetime Warranty
  • Galvanized safety end caps covering rotatable components 
  • 25′ full operation remote control cable “option” 

Tower Trailer

  • Structural outriggers. Lifetime Warranty
  • Diamond plate, 11 gauge deck
  • Electrical components bonded to frame for system grounding
  • All steel construction 10″ wide beam construction, no aluminum
  • 11-hole adjustable hitch coupler channel.  Lifetime Warranty
  • Removable 2 5/16″ ball hitch and pintle included
  • Seven-blade type connectors
  • 12,000LB side pull spring-loaded tongue jack
  • Two-hole 1/0 ground lugs (2 Ea)
  • Heavy-duty safety chains (2 Ea)
  • Tube ground rod attach points welded to outriggers (4 Ea)
  • Ground rod storage tube built-in trailer deck, green cap (1Ea)
  • Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
  • Galvanized 2′ x 2′ outrigger jack pads (4 Ea)
  • Slide outriggers with needle bearings for easy pull-out. (4 Ea)
  • Tamper-proof locking outrigger jacks. (4 Ea)
  • Bubble-type trailer level guides (4 Ea)
  • 8,000lb axles each electric brake (2 Ea)
  • Torsion axle independent suspensions
  • Five ea 16 ply 215-75-17.5 radial tires
  • 5 ea 17.50 powder-coated solid steel wheel  Lifetime Warranty
  • Mudflaps 
  • 12-position guy kit
  • The unguided footprint is the same as an outrigger footprint

Trailer Safety Features

  • 1/4” Line-X was sprayed on the entire deck and front of the trailer for anti-slip.
  • Anti-theft removable tongue. Lifetime Warranty
  • Emergency trailer break-away device
  • Full-size spare under deck
  • All-weather padlocks and hid-a key
  • Four sets of wheel loose nut indicators 
  • One ea trailer step-up, with one ea step handrail 
  • Flashing emergency lights 
  • DOT and Transport Canada LED lighting package and reflective tape
  • 36” steel locking aluminum powder coated black diamond plate toolbox secured
  • Decks’ water-fall sides add 400% strength vs. Flat steel welded to rail. Lifetime Warranty

Additional Features 

  • Equipped with lifting hooks in all four corners for a helicopter lift
  • Removable tongue for transport and anti-theft
  • Comprehensive operations manual 
  • Best warranty in the industry and  Lifetime Warranty
  • 24-hour support
  • High wind all-terrain off-road applications
  • Can be pulled with a standard 3/4 ton truck 
  • Build for rough, inaccessible terrain applications 
  • Engineered and designed to meet the rigor demand of all military environmental

A Few Options

  • Lock-out kit for climber safety
  • Safety climb, for climber safety
  • Lighting protection 
  • FAA Lighting 
  • Extra reels 
  • Slide-out 
  • Safety rails 
  • Pan adapter 
  • Starr mount 
  • Grounding kit
  • Tower covers
  • Generators
  • Fuel tanks 
  • Fuel pumps 
  • Lighting protection kit 
  • Hydraulic tilt backup hand pump  

LMS 65 CR Weights and Dimensions

  • Fits in a 40ft container
  • 9875 Lbs shipping weight
  • 6800 Lbs empty trailer
  • 16,000 Lbs GVWR
  • 5700 Lbs trailer useful load
  • 32′.5″ Long total unit
  • 7′ 2″ Tall
  • 7′ 7″ Wide trailer
  • 26′ Tower retracted minimum height