LMS 85 CRS
LMS 85 CRS Container Mobile Tower goes up to 85 feet and is mounted on trailers, skids, or auto-leveling platforms. Engineered for high wind and heavy loading. Safety built-in with no exposed pulleys or cabling winds, safety climbs, and lockouts for additional safety on all lattice tower designs. Platform safety includes LineX sprayed decks, locking outriggers, and jacks. Grounding lugs and ground rods are built-in. Never a failure of a tower engineer plan or trailer deployed worldwide. You can also find Landa Mobile Systems towers HERE. You can also find other LMS news HERE.
Lattice Tower 85′ container ready short (CRS) fits into a 20′ container
- 85’ tall with 5 ea section legs galvanized ASTM A500-07, A53-12, grade B, U.S. carbon steel
- Tilt base assembly integrated into trailer
- Three-sector antenna mount and custom mount designs are also available
- 5’ starr mount for large microwave dish placement with torque arm
- 16 ea ½” x 4” stiffener plates
- Tower and tilt assembly painted finish for all-weather
- 900:1 and 446:1 adjustable worm drive motors
- Tilted to vertical by two ea 3.5″ heavy-duty hydraulic cylinders
- Hydraulic tilt has a manual backup hand pump.
- Tower elevated by 2.5HP, wash downrated, direct-drive stainless shaft winch motor, and hydraulic gearbox assembly
- 1 minute from horizontal to vertical with a 2,000lb customer’s head load
- 110VAC 60HZ or optional 240VAC 50HZ
- Six ea. cable guide rings
- Patented derlin mast guide blocks
- Galvanized heavy-duty lifting and pull-down drums
- All tower sections certified 3/8″ diameter 7/19 galvanized aircraft quality cables certified to14,000Lb break strength
- All cables have been marinated in LPS3 for anti-corrosion
- 4″, 5″, and 6″ galvanized steel innovative custom bearings fitted pulleys also marinated in LPS3
- All Eco-Guard (TM) eco-coated grade 9 bolts
- All units are designed to withstand 120/160 degrees Fahrenheit
Tower Safety Features
- The backup emergency key operation
- Three ea. heavy-duty upper and lower limit switches
- Weatherproof (locking) control panel with ingress protection IP65
- Two ea. switches for total deployment control
- Two ea. illuminated function lamps for tilting and telescopic
- One ea. red keyed power disconnect for all function controls
- Theft-proof cable storage reel with grease nipple
- Galvanized safety end caps covering rotatable components
- 25′ entire operation remote control cable option
Tower Trailer
- Structural outriggers
- Diamond plate, 11 gauge deck
- Electrical components bonded to frame for system grounding
- All steel construction, 10″ wide beam construction, no aluminum
- 11-hole adjustable hitch coupler channel
- Removable 2 5/16″ ball hitch and pintle included
- Seven-blade type connectors
- 12,000LB side pull spring-loaded tongue jack
- Two-hole 1/0 ground lugs (2 Ea)
- Heavy-duty safety chains (2 Ea)
- Tube ground rod attach points welded to outriggers (4 Ea)
- Ground rod storage tube built-in trailer deck, green cap (1Ea)
- Adjustable 12,000LB locking jacks w/ padlock provided (4 Ea)
- Galvanized 18″‘ x 18″ outrigger jack pads (4 Ea)
- Slide outriggers with needle bearings for easy pull-out. (4 Ea)
- Tamper-proof locking outrigger jacks. (4 Ea)
- Bubble-type trailer level guides (4 Ea)
- 8,000lb axles for each electric brake (2 Ea)
- Torsion axle independent suspension
- Five ea 16 plies 215-75-17.5 radial tires
- Five ea 17.50 powder-coated solid steel wheels
- Mudflaps
- 12-position guy kit
- The unguided footprint is the same as the outrigger footprint
Trailer Safety Features
- 1/4” Line-X sprayed on full deck and front of the trailer for anti-slip
- Anti-theft removable tongue
- Emergency trailer break-away device
- Full-size spare under deck
- All-weather padlocks and hid-a key
- Four sets of wheel loose nut indicators
- One ea trailer step-up, with one ea step handrail
- Flashing emergency lights
- DOT and Transport Canada LED lighting package and reflective tape
- 36” steel locking aluminum powder coated black diamond plate toolbox secured
- Decks’ water-fall sides add 400% to strength vs. flat steel welded to rail
Additional Features
- Equipped with lifting hooks in all four corners for a helicopter lift
- Removable tongue for transport and anti-theft
- Comprehensive operations manual
- High wind all-terrain off-road applications
- Can be pulled with a standard 3/4 ton truck
- Build for rough, difficult terrain applications
- Engineered and designed to meet the rigor demand of all military environmental
A Few Options
- Lock-out kit for climber safety
- Safety climb, for climber safety
- Lighting protection
- FAA Lighting
- Extra reels
- Slide-out
- Safety rails
- Pan adapter
- Starr mount
- Grounding kit
- Tower covers
- Generators
- Fuel tanks
- Fuel pumps
- Lighting protection kit
- Hydraulic tilt backup hand pump
LMS 85 CRS Weights and Dimensions
- Fits in a 20ft container
- 11,180Lbs shipping weight (est)
- 16,000 Lbs GVWR
- 4,820 Lbs trailer useful load (est)
- 18’2″ deck length, the removable tongue
- 19’3″ shipping length
- 7′ 2″ transport height, horizontal nesting
- 24’3″ overall trailer length
- 7′ 6″ wide trailer
- 5′ removable tongue
- 23′ 2″ total combined trailer length
- 22′ 3″ tower retracted minimum height
